Operation Manual

2
ENGLISH
OF 500 S, OFE 710
connected to the plug terminal marked L or coloured red, and the blue (neutral) wire
of this appliance is connected to the plug terminal marked N or coloured black.
Under no circumstances must the wires of this appliance be connected to the earth
terminal of the plug marked either E, with the earth symbol or coloured green or
green/yellow.
The router can be used for rabbeting, rounding off, chamfering, routing of edges, as
well as pitting in wood and plastic. The router can additionally be used as a straight
grinder and in combination with a flexible shaft (accessory).
Do not use this product in another way as stated for normal use.
Always disconnect the plug from the socket before carrying out any work on the
machine.
The collet diameter must be corresponding to the shaft diamter.
nsert the shaft of the tool as far as
possible into the collet and tighten with
clamping nut.
To take out router cutter, loosen adjusting
nut until the cutter can be removed.
Use
Brief description
OFE
630
electronic
Modifications: Text, diagrams and data are correct at the time of
printing. In the interest of continuous improvement of our products,
technical specifications are subject to alteration without prior notice.
Setting wheel for electronic speed
preselection.
(only applicable for OFE 710).
Revolving depth gauge
for pre–setting of 3
different positions.
Locking screw to fix the motor: After
loosening the screw the motor can be
removed from the cage and be used as a
straight grinder.
On–/Off switch built as a large slide.
Parallel guide for parallel cutting
with a distance of up to 240 mm
from edge.
Clamping lever for
locking the cage.
Depth gauge for infinitely
variable setting of routing
depth according to scale.
Suction device for
connection of an
external suction hose.
Specially hardened cage guide
for infinitely variable routing
depth; the cage automatically
moves to original position when
clamping lever is loosened.
Plastic protection shoe
to protect sensitive
surfaces.
Exchanging
router cutters