User manual

7 Indicator lights
8 On/Off button
9 Function buttons
Indicator lights
Salt
Illuminates when the special salt has run out.
1)
Rinse aid
Illuminates when the rinse aid has run out.
1)
End of programme Illuminates when the washing programme has ended.
1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling
with salt and/or rinse aid is necessary.
The digital display indicates:
• the level of hardness to which the water softener is set,
• the number corresponding to the washing programme,
• the approximate remaining time of the running programme,
•
activation/deactivation of the rinse aid dispenser (ONLY with Multitab function active),
• the end of a washing programme (a zero will appear in the digital display),
• the countdown of the delay start,
• fault codes concerning malfunction of the dishwasher,
• activation/deactivation of the audible signals.
ÖKO PLUS button
With this option it is possible to reduce the energy consumption. This is reached by the
reduction of the temperature in the drying phase.
As a consequence of this the dishes could still be wet when the programme has ended. We
suggest, at the end of the programme, to slightly open the dishwasher door and leave it
ajar so that dishes can dry naturally.
This option can be selected with all washing programmes. The corresponding indicator light
comes on when the ÖKO PLUS button is pressed.
The ÖKO PLUS option will have no impact on some programmes. Refer to 'Washing pro-
grammes' for the list of programmes where the option ÖKO PLUS has or not impact.
For programmes were the option has an impact, the energy saving is between 10% and
25%.
Half load button
This option is useful and economical when baskets are not fully loaded. It reduces the
consumption of water and energy.
Remember to load both baskets.
6
Control panel
Downloaded from www.vandenborre.be