User manual

5/23
REGULATION OF THE GROUND
COFFEE
• The coffee machine comes out
of the factory already set on
an ideal coffee grinding level.
• Push the cabinet block button
(E/1).
• Take the coffee machine out of
the cabinet using the special
telescopic runners (E/2).
• The grinding level can be changed
using the special regulation knob
(A-10). Turning the knob in a
clockwise direction the grinding
becomes fine and the coffee
stronger. Turning the knob
counter-clockwise the grinding
becomes coarse and the coffee
lighter.
• Put again the coffee machine into
the relative seat (F/1), using the
special telescopic runners.
• Push again the cabinet block
button (F/2) so that the machine
will be well fastened.
PROGRAMMING OF THE GROUND
COFFEE MEASURE
• The coffee machine comes out
of the factory already set for
the delivery of a ground
coffee measure ideal for 1 cup
espresso.
• The ground coffee measure can
be increased or reduced and
once selected the required
measure, it can be also
memorised. The ground measure
that can be programmed refers
only to one single coffee. Grinding
time for double coffee comes out
automatically after having
memorised a single coffee.
• Set the coffee measuring knob (B-
19) on the “small cup” light on the
left (B-31), insert the 1-cup-filter-
holder (A-11 / A-12) under the
special funnel (A-5) and push
slightly the grinder button for
making the grinder works (A-4),
without releasing it. After 10
seconds the grinder will start
working and it is possible to
program the coffee measure, once
reached the required ground
coffee measure (recommended
measure 7g, corresponding to 6
seconds of grinding) just release
the grinder button (A-4) and the
measure will be automatically
memorised.
• Useful Advice: be careful to use
the right filter suitable for the
required ground coffee measure
(A-12÷13).