User manual

6/23
PROGRAMMING OF COFFEE
MEASURE IN THE CUP
• The coffee measure in the cup
can be as one likes.
• Set the coffee measuring knob (B-
19) on the required “coffee
measure” light and grind a certain
measure of coffee in the filter-
holder. Insert the filter-holder (A-
11) in the ring nut (A-1), and put
under it one or two cups
according to the selected
program.
• To access the programming stage
Keep the coffee button pressed
(B-21) for at about 5 seconds.
• When the coffee starts coming
out, release the button
(meanwhile the “coffee
measure” light will be blinking)(B-
27).
• When the required quantity is
reached push the button again (B-
21) and it will be automatically
stored in the control unit.
PROGRAMMING OF WATER
MEASURE
• Put a container under the steam
pipe (A-2)
• Turn the steam knob counter-
clockwise (B-18).
• To access the programming stage
Keep the water button pressed (B-
22) for at about 5 seconds.
• Release the button when the
water starts coming out.
• When the required quantity is
reached push the hot water
button again (B-22) and it will be
automatically stored in the control
unit.
5. ACCESSORIES
• The coffee machine is equipped
with one filter-holder (A-11) on
which two filters can be inserted:
- 1-cup (A-12)
- 2- cup (A-13)
By using paper pods, use only a
1-cup-filter.
• There is also a measure(A-14),
which is useful in order to know
exactly the ground coffee
measure (about 7,2 g).
• The machine have also two
nozzles, a 1-(A-15) and a 2-way
nozzle (A-16), that should be
alternatively screwed on the filter-
holder (A-11) according to what
one requires.
6. DRAWER (OPTIONAL)
• The machine can optionally have
also a well-equipped drawer with
a stainless steel front panel, type
PES 8036-m. The drawer has a
lot of useful compartments:
- One large compartment for cups
and saucers
- A basin for coffee-grounds
- A seat for all accessories (filters,
measure).
- A tray