User manual

14/23
• Make runners run until the safety
lock should click.
• With the machine completely
inserted in the seat use the
cabinet block button (A-6) and
check if it functions correctly.
• Adjust the cabinet block flask if
necessary and fix it as shown in
picture R/8
• Push the cabinet block button so
that the machine will be well
fastened (F/2).
WATER CONNECTION
• Push the cabinet block button
(E/1) .
• Take the coffee machine out of
the cabinet using the special
telescopic runners (E/2)
• Remove the lid of the water
reservoir (A-9), and take the filter
Brita out (A-17)
• Remove its packaging and bathe
the filter in cool water for half an
hour; then, insert it into the
special hole of the reservoir (S/1)
• Insert the flexible suction water
pipe (the one with the filter) and
the ventilation pipe in the special
grooves (S/2). Drive both the
pipes into the reservoir end-
-plate (S/3)
• Fill up the reservoir with hot water
• Attention: fill it only with cool
drinkable water: under no
circumstances put milk or other
liquids!
• Brita’s filter can be bought by
retailers of electric household
appliances, by our technical
Service Centre’s and in shops
authorised for selling this type of
spare-parts.
13. APPLIANCE
MALFUNCTION
In case of appliance malfunction make
sure that it does not depend on:
1. Lack of electricity
2. Lack of water in the reservoir
For the damaged power cable or any
servicing, please contact the Technical
Service Centre.
14. TECHNICAL
SPECIFICATIONS
For the general measurement of the
coffee machine see pictures.
• Width 594 mm
• Depth 260 mm
• Height 357 mm
• Capacity 3 litres.
• Net Weight 17 kg
• Gross Weight 19 kg
• Mains Voltage 220 V
• Heating element input