User manual

23
10. PROGRAMMING THE QUANTITY OF GROUND COFFEE
− This espresso machine has already been calibrated in factory to
dispense the ideal measure of ground coffee for one cup of espresso.
− However this quantity of ground coffee can be increased or reduced, then the
selected measure is stored. The programmable measure of ground coffee only
refers to one cup of coffee. Grinding time for selecting a measure of double
coffee is set automatically after the measure for a single coffee has been stored.
− Position the measuring spoon under
the proper funnel and press the
grinder button without releasing as
it is shown in the figure. Thus the
programming mode will be enabled
after approximately 10 seconds and
the grinder will start operating.
− As soon as the measuring spoon is
full to the brim, release the button
and this quantity will automatically
be stored.