User manual

COMPONENTS FOR INSTALLING THE MACHINE

This espresso machine will be installed into cabinets with height of 380 mm and

width ranging from 560 mm to 568 mm. The machine is equipped with the following

components for the installation:

1. 1 fixing base

2. 13 self-threading screws 3.9X19

3. 4 screws M4X16

4. 1 cable clamp

5. 2 side slides

6. 2 side-plates of 1 mm

7. 2 side-plates of 2 mm

8. 1 aligning bar

ELECTRICAL CONNECTION

− Fix the power cord onto the left

side of the cabinet using one of the

self-threading screws of the

equipment and the proper cable

clamp as it is shown in the figure.