User manual

34
INSTALLING THE ALIGNING BAR
− When this espresso machine is
assembled in a composition of
electric household appliances, it
could be installed beside a oven 10
mm higher. Align the assembly
fixing the proper bar under the
frontal panel with the four screws
M4x16, as it is shown in the figure.
COMPONENTS FOR INSTALLING THE (OPTIONAL) DRAWER
This drawer will be installed into compartments with height of 80 mm and width
ranging from 560 mm to 568 mm. The espresso machine is equipped with some
components for the installation:
1. 1 fixing base
2. 12 self-threading screws 3.9X19
3. 2 side slides
4. 2 side plates of 1 mm
5. 2 side plates of 2 mm