User manual

37
− Four side plates (two being 2 mm
thick and two 1 mm thick) are
provided together with the
machine, to compensate for the
different possible measures. They
should be used to compensate for
the internal width of the
compartment, leading to a width of
562/560 mm.
− Fix the base plate of the machine
inserting 4 self-threading screws into
the 4 fore holes of the same plate.
Then assemble the 2 slides with the
remaining 8 self-threading screws.
All these screws are supplied
together with the machine.
− Insert the drawer coupling its slides
with those mounted onto the
cabinet’s sides and slide it into the
cabinet to the stops.