Power Supply User's Manual

automatically. The supply of the inverter through the mains is

resumed and the battery charger charges the battery.

The bar graph LED (LED chain above the pictograph) indicates

the remaining battery capacity during this operating mode (see

chapter 8, p. 48 ff).

6.1.3 Bypass Operation

Batterie

Lade GR

GR WR

Hand-

umgehung

Handumgehungspfad

EUE

Netzeingangs-

sicherungs-

automat

Netz

Schematische

Darstellung

Gesicherte

Schiene:

Verbraucher

Energiefluss bei

gestörtem WR

Energiefluss bei gestörtem WR Power circuit with faulty INV

Handumgehungspfad Manual bypass path

Netz Mains

GR REC

EUE SBS

WR INV

Netzeingangssicherungsautomat Mains input miniature circuit breaker

Lade GR Load REC

Handumgehung Manual bypass

Gesicherte Schiene Secured busbar

Schematische Darstellung Schematic diagram

Batterie Battery

Verbraucher Load

If the inverter is overloaded or if overtemperature is detected,

e.g. also if an inverter defect is detected, voltage is supplied to

the load without interruption via the static bypass switch (SBS)

that switches on automatically. This is signalled by the Bypass

LED.