Operating instructions

Protect 5.31/xxx-480-220-120 10 kVA - 120 kVA
Page 14 of 56 8000020680 BAL, en
4 Transport, Storage and Installation
4.1 Packing
The UPS units are packed at the works to withstand both rail and
road transport. The housing is fixed to the transport pallet using four
bolts. The unit is packed in plastic film to prevent any damage to the
surface paint and protect the unit against moisture.
i
NOTE:
To prevent damage only remove the protective film from the UPS
immediately prior to installation.
The four fixing bolts on the base frame can then be removed using a
spanner.
4.2 Crane Transport
CAUTION:
Do not walk under suspended loads!
Always wear protective clothing such as a helmet, safety shoes
and work gloves!
Transport the unit with due care and observe the safety
regulations!
ATTENTION:
Only transport the UPS in an upright position!
Never tilt or cant it, avoid displacing the centre of gravity!
Figure 4 Transporting by crane