Operating instructions

Protect 5.31/xxx-480-220-120 10 kVA - 120 kVA
Page 2 of 56 8000020680 BAL, en
Notes on these Operating Instructions
Duty to provide information
These operating instructions must be read carefully by all persons
working with or on the UPS prior to installation and initial start-up.
These operating instructions are a composite part of the UPS.
The owner of this unit is obliged to communicate the full content of
these operating instructions to all personnel transporting or starting
the UPS or performing maintenance or any other work on this unit.
Validity
These operating instructions comply with the current technical
specifications of the UPS at the time of publication. The contents do
not constitute a subject matter of the contract, but serve for
information purposes only.
AEG Power Supply Systems GmbH reserves the right to make
modifications with regard to the content and technical data in these
operating instructions without prior notice. AEG Power Supply
Systems GmbH cannot be held liable for any inaccuracies or
inapplicable information in these operating instructions, as no
obligation to continuously update the data and maintain their validity
has been entered into.
Warranty
Our goods and services are subject to the general conditions of
supply for products of the electrical industry, and our general sales
conditions. We reserve the right to alter any specifications given in
these operating instructions, especially with regard to technical data,
operation, dimensions and weights. Claims in connection with
supplied goods must be submitted within one week of receipt, along
with the packing slip. Subsequent claims cannot be considered.
AEG Power Supply Systems GmbH will rescind all obligations such
as warranty agreements, service contracts, etc. entered into by AEG
Power Supply Systems GmbH or its representatives without prior
notice if maintenance and repair work is carried out using anything
other than original AEG Power Supply Systems GmbH spare parts or
spare parts purchased from AEG Power Supply Systems GmbH.
Handling
These operating instructions for the UPS are structured so that all
work necessary for start-up, maintenance and repair of the unit can
be performed by qualified personnel.
Illustrations are provided to clarify and facilitate certain steps.
If danger to personnel and equipment cannot be ruled out in the case
of certain work, it is highlighted accordingly by pictograms explained
in Chapter 1, Safety Regulations.