Operating instructions

Protect 5.31/xxx-480-220-120 10 kVA - 120 kVA
Page 39 of 56 8000020680 BAL, en
9.3.2 Main Menu
Blocking
Settings
Service
00:00
Thu 01-Jan-04
Information
Fault history
Operating display
Current cursor position
Fig. 18 Main menu
After start-up, the “main menu” represents the highest menu level,
which means that you can open further submenus from here, and you
can always return to this level.
The “main menu” has the typical menu structure.
Additional submenus are displayed on the left-hand side. All
selectable submenus are displayed in a frame. A black background
indicates the current cursor position. The bottom line displays the
current real time, which can be adjusted using the "Settings" menu.
On the right-hand side, the current key function is represented as a
symbol which is displayed in a small framed area. You can move the
cursor using the "<" and ">" keys to select the corresponding
submenu. Use the ENTER key to activate a selected submenu.
Using the "?" key, you can call up the “Help” menu, which
describes the various keyboard symbols.
9.3.3 Operating Display
You can call up the operating display from the “main menu”. If the
DOU is not used for a certain period of time, the system
automatically switches back to the operating display and the LCD
background illumination is switched off. If you have started specific
processes, such as a battery test, in a menu, this menu remains
active until the process has been completed.
10110
Load L1-L3
[%]
100 10
Batt.
[min]
Figure 19 UPS operating display (normal operation)