Operating instructions

Protect 5.31/xxx-480-220-120 10 kVA - 120 kVA
Page 54 of 56 8000020680 BAL, en
13 Spare Parts and Customer Service
Despite using non-wearing components, we recommend stocking the
spare parts listed in Table 10. This will help to ensure permanent
operational availability of your UPS.
Item Component
F1 to F10 Fuse, 2 A, slow-blow
F13 to F22 Fuse, 5 A, fast
F24 to F27 Fuse, 2 A, fast
F28 Fuse, 2 A, slow-blow
F31 to F33 Fuse, 5 A, fast
M1 to M10 Fans
K7 Contactor
Q1 Load interrupter switch
Q29 Uninterruptible changeover switch
Table 11 Spare part stocks
i
NOTE:
When ordering spare parts, please always state the designation
(item / component) and the unit number.
If the battery for the UPS system has been supplied by AEG Power
Supply Systems GmbH, the battery has been specially designed for
the Protect model. Use a comparable battery type when replacing the
battery!
We would like to draw your attention to the fact that spare parts not
supplied by us have neither been tested nor approved. Installation of
such spare parts can therefore have a detrimental effect on the
functional capability and passive safety of the system. We do not
accept any liability for any resulting damage.
Our customer service department will be pleased to send you a
complete spare parts list for your UPS.
Please contact the following address for help in this matter or if you
have any further questions or suggestions:
 AEG Power Supply Systems GmbH
Emil-Siepmann-Straße 32
D-59581 Warstein
Germany
 [phone]
FAX: [phone]
E-mail: [e-mail]