Operating instructions

18
Check the content is complete:
♦ PROTECT A. with 1000 or 1400 VA
♦ Mains connection cable with shockproof plug
acc. to CEE 7/7
Second mains connection cable with UK plug
acc. to BS 1363
♦ Two device connecting cables
♦ USB / RS232 communication cable
♦ Management software “CompuWatch” on CD
♦ Operating instructions
Please contact our hotline (see page 5) in case of any
discrepancy.
The original packaging provides effective protection against
mechanical shocks and should be retained so the unit can be
transported safely later on.
Please keep the plastic packaging
bags away
from babies and children in order to safeguard
against suffocation accidents.
4.2 Installation Site
PROTECT A. is designed to be installed in a protected
environment. When installing the unit, pay attention to such
factors as sufficient ventilation and suitable ambient
conditions.
PROTECT A. is air-
cooled. Do not obstruct the air
vents!
The UPS should preferably be operated at room
temperature (between 15° C and 25° C).
Install the UPS in a room that is dry, relatively dust-free and
free of chemical vapours.
Make sure that no magnetic storage media are stored and/or
operated close to PROTECT A.
Check the nameplate to make sure the voltage
and frequency data correspond to the values
applicable to your loads.