Operating instructions

Inverter

Battery

Rectifier

Load

Mains

Line

filter

A. V. R.

the internal energy storage, something which in turn has a

positive effect on battery availability.

UPS Block diagram PROTECT A.

The static bypass switch is activated in the event of a mains

failure. The inverter then takes over the voltage supply of the

connected loads, in order to prevent the risk of data loss or

damage to the loads. PROTECT A. supplies voltage until the

batteries are discharged or your IT system has been shut

down and switched off properly.

The standby time mainly depends on the connected loads. If

the mains power supply is back to normal values, the UPS will

switch back the loads to mains supply. The battery charger will

then recharge the batteries.

For safety reasons (as required by German standards, VDE),

the mains input in the unit will be disconnected by a two-pole

switch in the event of a mains failure. Energy backfeed to the

mains and voltage supply to the pins of the mains connector

are thus reliably avoided.

Furthermore, additional measures ensure effective protection

for the data/network interface.

Static bypass

switch