User Guide

15
3.4 Technical Data
Type rating
PROTECT A.500 500 VA / 300 W
PROTECT A.700 700 VA / 420 W
UPS input
Nominal connection voltage 220 / 230 / 240 Vac
Voltage range without battery 170 Vac to 280 Vac
Frequency (automatic detection) 50 / 60 Hz
Connection Non-heating appliance
connector IEC 320 C 14
UPS output
Rated output voltage / 230 Vac
AVR technology
Rated output voltage in ±10 %
battery operation
Frequency in battery operation 50 Hz / 60 Hz ±1Hz
Nominal output current 2.2 A ( PROTECT A.500 )
3.0 A ( PROTECT A.700 )
Changeover time
in the event of a mains failure 2-6 ms (typical)
Type of voltage approximated sine
Connection 4 non-heating appliance
connectors IEC 320 C 13
with overvoltage protection,
3 with UPS back-up
Protection against over- yes
temperature and short circuit
Battery
Autonomy time at nominal load 2 min
Exhaustive discharge protection/ yes
protection against excess load