Operation Manual

Protect PV.250 Operating Instructions
Page 34 of 51 80000027023 BAL, en
6.1.4.3 Configuring Modbus Data Transmission
To access the X5 data transmission configuration, you must
press <2> in the main menu:
Fig. 19 Modbus/JBus data transmission configuration
Press one of the following keys in the "X5 Data Transmission"
menu:
• <1-7> to set the baud rate.
• <n,e,o> to set the parity.
• <8,9> to set the number of stop bits.
• <CR> to save the settings. The configuration is finished and
the main menu is opened again.
• <ESC> to cancel the configuration. This opens the main
menu.
The Modbus factory setting is: 19200 8 E 1.