User's Manual

Protect PV.500-MH Operating Instructions
66 of 68 80000043212 BAL
Use the bottom key with the measuring instrument symbol to call
up menus with detailed information on the status and the meas-
ured values. This key flashes in the event of a fault in the unit, en-
abling you to access menus containing additional fault information
directly.
8.3.4 Status/Measured Values
You can call up the "Status/Measured values" menu from the op-
erating display
using the bottom key with the measuring instrument symbol.
Here you can use the "<", ">", "^" and ENTER keys to open the
submenus containing the statuses and measured values for the
individual unit components.
Press the ENTER key to return to the Status/Measured values
menu.
-- Status/data --
AUX signals
Inverter
Menu
Photovoltaic
COM interface
Grid side
Figure 39 Menu: Status/Measured values
You can use the "Photovoltaics" menu item to display the meas-
ured values for the panels. Any faults in the DC distribution are
shown here too.
-- Photovoltaic --
U
DC
.[V]: 600 R-ISO[kOhm]: 100
I
DC
.[A]: 481
P
DC
[kW]: 289
Figure 40 Photovoltaics menu (example)
You can use the "Incoming mains" menu item to display the meas-
ured values for the incoming mains. Any mains faults or faults in
the AC distribution are shown here too.
-- Grid side --
U
L12-31
.[V]: 270 270 270
I
L1-3
..[A]: 587 587 587
F....[Hz]: 50.0 Failures: 2
Figure 41 Menu: Incoming mains (example)
[kohm]