Installation Instructions

1) Max. number of inverters are 100. If GSM modem is used for portal upload, the amount of inverters in a

network is limited to 50.

2) For outdoor use, we recommend outdoor burial type cable (if buried in the ground) for both Ethernet

and RS485.

3) Third input is used for compensation of the irradiation sensor.

4) The number of inverters to be connected in the RS485 network depend on which peripheral device is

connected.

To ensure fulfilment of IP enclosure rating, correctly mounted cable glands are es-

sential for all peripheral cables.

To ensure EMC compliance, shielded cables must be applied for Sensor inputs and

RS485 communication. Unshielded cables may be applied for alarm outputs.

Other auxiliary cables must pass through the designated EMC cable clamps to es-

tablish mechanical fixing and in case of shielded cable termination to the shielding

device.

Parameter Condition Specification

Potential free contact Relay output x 1

Rating AC 250 VAC, 6.4 A, 1600 W

Rating DC 24 VDC, 6.4 A, 153 W

Maximum wire gauge

2.5 mm

Over voltage category Class III

Optional

Modem GSM

Table 5.9: Auxiliary Input Specifications

Illustration 5.6: Communication Board

5. Technical Data

30 8000038781_00_BAL_en / L00410564-01_02