Operation Manual

English
42
Accessories (Fig. A)
1 Clipper head
1 Hair clipper
1 Charging station/stand
1 Cutting length comb
1 Power adapter
1 Cleaning brush
Table: Cutting step versus cutting length
Cutting step Cutting length
1= approx. 3.0 mm
3= approx. 6.0 mm
5= approx. 10.0 mm
7= approx. 13.0 mm
9= approx. 16.0 mm
Charging the Unit
• Turntheunitoff.“0”canbeseenontheswitch(6).
• Connectthepoweradaptorconnectorwithoneofthefollowingjacks.
• Thesocketdirectlyatthebottomendoftheunit(5).
• Alternativelyplacetheunitinthechargingstation.Thesocketisattherear.
• Plugthepoweradaptorintoa230V/50Hzwalloutlet.
• Theindicatorlightremainsredduringthechargingprocess.
NOTE:
The charge indicator does not indicate the state of charge of the rechargeable battery.
• Chargetheunitbeforerstusefor10hours.
NOTE:
• Afterinitialuse,donotchargethebatteryforlongerthan8hoursatonetime.
• Ifthebatteryisempty,theappliancecanbeoperatedfromthemains.Todoso,con-
nect the adapter directly to the clipper.
CAUTION:
After 8 hours always disconnect from mains power supply.