User manual

temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
3.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
3.3 Installation of the
appliance and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
3.4 Installation of the
CLEANAIR CONTROL filter
On delivery the filter is in a plastic bag.
1. Open the air ventilation flap.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot in the back
of the flap.
4. Close the flap.
Make sure that the air
ventilation flap is always
closed so that the filter
functions correctly.
www.aeg.com6