User manual

Remove transport safeguard

The appliance and the interior fittings are protected for transport.

• Remove all adhesive tape and packing pieces from the interior of the

appliance.

Your appliance is equipped with shelf

retainers that make it possible to

secure the shelves during transporta-

tion.

To remove them proceed as follows:

Move the shelf retainers in the direc-

tion of the arrow, raise the shelf from

the rear and push it forward until it

is freed and remove the retainers.

>PE< for polyethylene, e.g. the outer covering and the bags in the interior.

>PS< for polystyrene foam, e.g. the pads, which are all free of chlorofluo-

rocarbon.

The carton parts are made from recycled paper and should be disposed of

at a waste-paper recycling collection location.

Disposal of old Appliances

For environmental reasons, refrigeration appliances must be disposed of

properly. This applies to your old appliance, and - at the end of its service

life - for your new appliance as well.

Warning! Before disposing of old appliances make them inoperable. Remo-

ve plug from mains, sever the power cable, remove or destroy any snap or

latch closures. This eliminates the danger that playing children lock them-

selves into the appliance (danger of suffocation!) or place themselves into

other life-endangering situations.

Disposal:

• The appliance may not be disposed of with domestic waste or bulky refuse.

• The refrigerant circuit, especially the heat exchanger at the back of the

appliance, may not be damaged.

• Information concerning collection schedules or locations can be obtained

from the local disposal authorities or town hall.