Operation Manual

7.4 Rear spacers
Inside the appliance you find two
spacers which must be fitted as shown
in the figure.
Slacken the screws and insert the spacer
under the screw head, then retighten the
screws.
7.5 Door reversibility
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To change the opening direction of the
door, do these steps:
E
D
F
F
Remove the clip-in plinth (D). Remove the
bottom hinge (E) by unscrewing the fixing
screws.
G
Remove the door from the pin (G). Unscrew
the pin (G) and screw it on the opposite
side.
Remove the cover from the top of the door
and position it on the opposite side.
Refit the door.
Fix the bottom hinge (E) on the opposite
side, using the screws previously removed.
Remove the cover (F) from the plinth (D) by
pushing it in the direction of the arrow and
install it on the opposite side.
Install the plinth (D), clipping it into place.
ENGLISH 25