User manual

8.6 Removing the shelf holders
A
B
C
Your appliance is equipped with shelf re-
tainers that make it possible to secure
the shelves during transportation.
To remove them proceed as follows:
1.
Move the shelf holders in the direc-
tion of the arrow (A).
2.
Raise the shelf from the rear and
push it forward until it is freed (B).
3.
Remove the retainers (C).
8.7 Door reversibility
E
F
A
B
DC
WARNING!
Before carrying out any opera-
tions, remove the plug from the
power socket.
To carry out the following opera-
tions, we suggest that this be
made with another person that
will keep a firm hold on the doors
of the appliance during the oper-
ations.
• Remove the spacer (A) and move to
the other side of the hinge pivot (B).
• Remove the doors.
• Remove the left-hand cover pin of the
middle hinge (C,D) and move to the
other side.
• Fit the pin of the middle hinge (B) into
the left-hand hole of the lower door.
A
C
B
• Remove using a tool the cover (A). Un-
screw the lower hinge pivot (B) and
the spacer (C) and place them on the
opposite side.
16
www.aeg.com