User manual

formation is given about them to avoid
unnecessary charges on service.
The operation of the appliance
goes with certain sounds (com-
pressor and circulating sound).
This not means a trouble, but a
normal operation.
The appliance operates discon-
tinuously, so the stopping of
compressor does not mean be-
ing no current. That is why you
must not touch the electrical
parts of the appliance before
breaking the circuit.
Problem Possible cause Solution
The appliance is
noisy.
The appliance is not sup-
ported properly.
Check if the appliance
stands stable (all feet and
wheels should be on the
floor). Refer to "Levelling".
The buzzer sounds.
The Alarm icon flash-
ing.
The door is not closed
correctly.
Refer to "Door open
alarm".
upper or lower
square is shown in
the temperature dis-
play.
An error has occurred in
measuring the tempera-
ture
Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible)
“dEMo” appears on
the display.
The appliance is in dem-
onstration mode.
Keep pressed approxi-
mately 10 sec the OK but-
ton since a long sound of
buzzer is heard and the
display shut off for a short
while: appliance start
works regularly.
The compressor runs
continuously.
The Temperature regula-
tor may be set incorrectly.
Set a warmer temperature.
The door is not closed
correctly.
Refer to "Closing the
door".
The door has been
opened too frequently.
Do not keep the door
open longer than necessa-
ry.
The food temperature is
too high.
Let the food temperature
decrease to room temper-
ature before storage.
The room temperature is
too high.
Decrease the room tem-
perature.
Water flows inside
the refrigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food prevent that water
flows into the water col-
lector.
Make sure that food do
not touch the rear plate.
ENGLISH 29