User manual

The appliance should be installed well
away from sources of heat such as
radiators, boilers, direct sunlight etc.
Ensure that air can circulate freely around
the back of the cabinet. To ensure best
performance, if the appliance is
positioned below an overhanging wall
unit, the minimum distance between the
top of the cabinet and the wall unit must
be at least 100 mm . Ideally, however, the
appliance should not be positioned
below overhanging wall units. Accurate
levelling is ensured by one or more
adjustable feet at the base of the
cabinet.
100 mm
15 mm 15 mm
9.5 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
1. Unscrew both screws on the rear
side.
2.
Push back the top and lift it.
3. Unscrew the left foot.
4. Unscrew the screws of the door
bottom hinge. Remove the hinge.
Put over the pin in the direction of
the arrow.
5. Unscrew and install the screw on the
opposite side.
6. Install the hinge on the opposite
side.
7. Screw the right foot.
8. Unscrew the screws of the door top
hinge.
www.aeg.com
12