User manual

818 34 48-00/3 43
What to do if ...
Before contacting your local Service Force Centre, check the following
points.
Symptom Solution
No power to the appliance.
Check there is power at the socket
Check there is not a power cut by
checking the household lights.
Check the fuse has not blown.
Appliance cools too much.
Temperature is set too cold.
Temporarily select a higher temperature
setting.
The temperature in the refrigerator/
freezer is too high.
Check the ambient temperature is within
the appliances operating limits
Check the temperature setting is correct
relative to ambient conditions.
Food items in the 0 °C fridge section are
frozen.
Move the food items (distribute them
around the 0 °C fridge section as much as
possible, do not push them against the
wall).
Hold down the “+” and “-” buttons for
the fridge for approximately 5 seconds in
order to switch over to an increased
operating temperature. A short acoustic
signal will sound.
To switch back to the normal operating
temperature, hold down the “+” and “-”
buttons for the fridge for approximately
5 seconds again. A short acoustic signal
will sound.
Temperature display shows a square or a
letter.
There is a function fault.
Please contact your local Service Force
Centre. Do not open the door of the
appliance again.
Warning tone sounds, red warning display
is flashing.
“Open door“ warning.
Please check in "Control and Information
System" section.