User manual

Re-screw the handle bracket on the
door (h4). Turn the handle bracket
with the handle and screw them to
the door (h5) and the fitted handle
bracket (h6).
11.
Re-insert the lower door on the low-
er hinge pivot (b2).
12.
Insert the middle hinge (m2) into the
left drill of the lower door.
13.
Unscrew the upper hinge pivot (t1)
and place it on the opposite side.
t1
14.
Fit the upper door on the upper
door pivot.
15.
Re-insert the upper door on the mid-
dle hinge pivot (m5) slightly tilting
both doors.
16.
Re-screw the middle hinge (m2). Do
not forget the plastic spacer (m1).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cab-
inet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact
the nearest After Sales Service Force.
The After Sales Service specialist will car-
ry out the reversibility of the doors at
your cost.
11. ENVIRONMENT CONCERNS
Recycle the materials with the
symbol
. Put the packaging in
applicable containers to recycle it.
Help protect the environment and
human health and to recycle waste
of electrical and electronic
appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling
facility or contact your municipal
office.
20
www.aeg.com