User manual

If the function is activated auto-
matically the DYNAMICAIR indi-
cator is not shown (refer to "Daily
use").
The activation of the DYNAMI-
CAIR function increases the ener-
gy consumption.
3.14 FROSTMATIC function
To switch on the function:
1.
Press the Mode button until the cor-
responding icon appears.
The FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
The FROSTMATIC indicator is
shown.
This function stops automatically after 52
hours.
To switch off the function before its au-
tomatic end:
1.
Press the Mode button until the
FROSTMATIC indicator flashes.
2.
Press the OK button to confirm.
3.
The FROSTMATIC indicator goes
off.
Place the fresh food to be frozen
in the FROSTMATIC basket.
The function switches off by se-
lecting a different freezer set
temperature.
4. FIRST USE
4.1 Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product,
then dry thoroughly.
Do not use detergents or abra-
sive powders, as these will dam-
age the finish.
5. DAILY USE
5.1 Temperature indicator
To assist you in controlling your appli-
ance correctly we have fitted a tempera-
ture indicator to your refrigerator, placed
in the coldest area.
The coldest area of the refrigerator
compartment is at the level of the
lower glass shelf.
The space directly above the glass shelf
of the fruit and vegetable drawer is the
coldest region of the refrigerator com-
partment as shown by the shelf or the
sticker on the wall of your appliance. For
proper storage of the food in your refrig-
erator and particularly in the coldest
area, ensure that the temperature indica-
tor is displaying “OK”.
OK
If “OK” is not displayed, the average
temperature in the area is too high. Ad-
just the temperature controller to a cold-
er setting. Since the “OK” display is in
black, it is difficult to see if the tempera-
ENGLISH 9