EN User Manual Refrigerator S84020KMW0
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION.............................................................................................. 6 4. OPERATION...................................................................................................................
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.
www.aeg.com • • • • Do not use water spray and steam to clean the appliance. Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. 2.
ENGLISH • Do not change the specification of this appliance. • Do not put electrical appliances (e.g. ice cream makers) in the appliance unless they are stated applicable by the manufacturer. • Be careful not to cause damage to the refrigerant circuit. It contains isobutane (R600a), a natural gas with a high level of environmental compatibility. This gas is flammable. • If damage occurs to the refrigerant circuit, make sure that there are no flames and sources of ignition in the room. Ventilate the room.
www.aeg.com 3. PRODUCT DESCRIPTION 3.
ENGLISH 7 4. OPERATION 4.1 Control panel 1 6 1 2 3 4 5 Display Temperature warmer button Temperature colder button OK 4 3 2 5 Mode 6 ON/OFF It is possible to change predefined sound of buttons by pressing together Mode and Temperature colder button for some seconds. Change is reversible. Display A B C D H G F E A) B) C) D) E) Timer function COOLMATIC function Holiday function Temperature indicator Alarm indicator 4.2 Switching on 1. Connect the mains plug to the power socket. 2.
www.aeg.com The set temperature will be reached within 24 hours. After a power failure the set temperature remains stored. 4.5 COOLMATIC function If you need to insert a large amount of warm food, for example after doing grocery shopping, we suggest activating the COOLMATIC function to chill the products more rapidly and to avoid warming the other food which is already in the refrigerator. • a flashing Alarm indicator; • an acoustic buzzer.
ENGLISH 4.10 ExtraHumidity function To increase humidity in the refrigerator, activate the ExtraHumidity function. 1. Press Mode until the corresponding icon appears. The ExtraHumidity indicator flashes. 2. Press OK to confirm. The ExtraHumidity indicator is shown. To deactivate the function, repeat the procedure until the ExtraHumidity indicator turns off. 5. DAILY USE WARNING! Refer to Safety chapters. 5.
www.aeg.com After putting fresh food into the appliance or after opening the door repeatedly or for a long period, it is normal for the indicator not to show "OK"; wait at least 12 hours before readjusting the temperature controller. 5.4 Bottle rack 1. Place the bottles (with the opening facing front) in the pre-positioned shelf. 5.6 DYNAMICAIR If the shelf is positioned horizontally, place only closed bottles. 2.
ENGLISH • A faint click noise from the temperature regulator when the compressor switches on or off. 6.2 Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. 6.3 Hints for fresh food refrigeration To obtain the best performance: • do not store warm food or evaporating liquids in the refrigerator • do cover or wrap the food, particularly if it has a strong flavour • position food so that air can circulate freely around it 6.
www.aeg.com The equipment has to be cleaned regularly: 1. Clean the inside and accessories with lukewarm water and some neutral soap. 2. Regularly check the door seals and wipe clean to ensure they are clean and free from debris. 3. Rinse and dry thoroughly. 4. If accessible, clean the condenser and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save electricity consumption. 7.
ENGLISH 13 8.1 What to do if... Problem Possible cause Solution The appliance does not operate. The appliance is switched off. Switch on the appliance. The mains plug is not con- Connect the mains plug to the nected to the mains socket mains socket correctly. correctly. The appliance is noisy. There is no voltage in the mains socket. Connect a different electrical appliance to the mains socket. Contact a qualified electrician. The appliance is not supported properly.
www.aeg.com Problem Possible cause Solution The door is not closed cor- Refer to "Closing the door". rectly. The COOLMATIC function Refer to "COOLMATIC funcis switched on. tion". The compressor does not start immediately after pressing the COOLMATIC, or after changing the temperature. This is normal, no error has The compressor starts after a occurred. period of time. Water flows inside the refrig- The water outlet is clogerator. ged.
ENGLISH Problem Possible cause 15 Solution The COOLMATIC function Refer to "COOLMATIC funcis switched on. tion". There is no cold air circula- Make sure that there is cold air tion in the appliance. circulation in the appliance. If the advice does not lead to the desired result, contact the nearest Authorised Service Centre. 2. If necessary, adjust the door. Refer to "Installation". 3. If necessary, replace the defective door gaskets. Contact the Authorised Service Centre. 8.2 Closing the door 1.
www.aeg.com 100 mm min 9.5 Levelling Accurate levelling prevents the vibration and noise of the appliance during operation. To adjust the heigh of the appliance loosen or tighten the two adjustable front feet. B A 20 mm 16 9.3 Electrical connection • Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond to your domestic power supply. • The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose.
ENGLISH 17 9.7 Door reversibility In case you want to change the opening direction of the door, contact the nearest Authorised Service Centre. The Authorised Service specialist will carry out the reversibility of the doors at your cost. 3. Insert the filter in the slot found in the back of the air lever flap. 4. Close the air lever flap. 10. TECHNICAL INFORMATION 10.
www.aeg.
ENGLISH 19
280152917-B-102015 www.aeg.
