Operation Manual

ENGLISH 17
CARE AND CLEANING
CLEANING OF THE INTERIOR
PARTS
Use cloth with water and mild (neutral) de-
tergent to clean.
1.
Dispenser Water Shelf
Remove the spill grill and clean the
water shelf regularly (the spill shelf is
not self-draining).
2.
Ice Cube Storage Case
– Removing: pull up the case assem-
bly forward to remove.
– Replacing: fit to the side grooves
and insert to the end. If it is difficult
to fully insert the case, remove it,
rotate the swirl coil in the case or
drive mechanism a quarter turn and
insert again.
– Do not store ice cubes for too long.
3.
Freezer and Refrigerator Pockets
Hold both ends and pull up.
4.
Freezer and Refrigerator Shelves
Open the door completely, then pull
shelves forward to remove.
5.
Vegetable and Fruit Case
Pull forward and lift up a bit to re-
move.
CLEANING OF DOOR
PACKAGING
Use cloth with mild (neutral) detergent.
CLEANING OF THE BACK OF
THE APPLIANCE (MACHINE
ROOM)
Remove dust on a grill with a vacuum
cleaner at least once a year.
6
www.aeg.com
CHANGING THE INTERIOR
LED LIGHT
CAUTION!
LED light should be replaced only
by a service agent or similarly
qualified person.
CAUTION!
Be sure to unplug the appliance
first!
Freezer and refrigerator LED changing
1.
Separate a back side of a LED cover
using a screwdriver.
2.
Separate the LED cover and loosen 2
fixing screws for a LED plate.
x2
3.
Disconnect a harness of the LED plate
and change LED.
An assembly method is the oppo-
site of a disassembling sequence.
(1*/,6+ 7