User manual

Troubleshooting

Symptom Cause Solution

The blender does not

switch on.

Jug/base are not xed properly. Check if all the components are in correct

position.

Note! the jug can only be placed on the base

with handle towards the user interface.

The Power button is not pressed. Make sure the Power button is illuminated.

If not, press the Power button to turn the

blender on.

The motor has overheated. The display is

blinking.

Wait until the product has cooled down and

all the buttons are lit.

The plug is not properly connected to the

power outlet.

Check the connection of the plug to the out-

let or try another outlet.

Power outage. Wait until power outage is over.

Functional problem. Contact authorized service.

Troubleshooting

SB9300_Premium_Blender_AEG.indd 24 2016-02-24 09:11:40