SCD91800S0 FR Notice d'utilisation DE Benutzerinformation 2 27
www.aeg.com SOMMAIRE 1. 2. 3. 4. 5. 6. 7. 8. 9. INSTRUCTIONS DE SÉCURITÉ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BANDEAU DE COMMANDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 UTILISATION QUOTIDIENNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CONSEILS UTILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FRANÇAIS 1. 3 INSTRUCTIONS DE SÉCURITÉ Pour votre sécurité et garantir une utilisation correcte de l'appareil, lisez attentivement cette notice, y compris les conseils et avertissements, avant d'installer et d'utiliser l'appareil pour la première fois. Pour éviter toute erreur ou accident, veillez à ce que toute personne qui utilise l'appareil connaisse bien son fonctionnement et ses fonctions de sécurité. Conservez cette notice avec l'appareil.
www.aeg.com Si le circuit frigorifique est endommagé : – évitez les flammes vives et toute autre source d'allumage – aérez soigneusement la pièce où se trouve l'appareil • Ne modifiez pas les spécifications de l'appareil. Si le câble d'alimentation est endommagé, il peut causer un court circuit, un incendie et/ou une électrocution.
FRANÇAIS • Déballez l'appareil et vérifiez qu'il n'est pas endommagé. Ne branchez pas l'appareil s'il est endommagé. Signalez immédiatement au revendeur de l'appareil les dommages constatés. Dans ce cas, gardez l'emballage. • Il est conseillé d'attendre au moins quatre heures avant de brancher l'appareil pour que le circuit frigorifique soit stabilisé. • Veillez à ce que l'air circule librement autour de l'appareil pour éviter qu'il ne surchauffe.
www.aeg.com Pour augmenter le volume de la tonalité des touches, appuyez simultanément sur la touche Mode et la touche de diminution de la température pendant plusieurs secondes. Ce changement est réversible. 2.1 Affichage A B C D Off COOL MATIC E F FROST MATIC K J I Les indicateurs de température indiquent la température programmée par défaut. Pour sélectionner une température de consigne différente, reportez-vous au paragraphe « Réglage de la température ». 2.3 Mise à l'arrêt G min L 5.
FRANÇAIS paragraphe « Réglage de la température ». 2.6 Réglage de la température La température du réfrigérateur et du congélateur peut être réglée en appuyant sur les dispositifs de réglage de température. Température par défaut : • + 5 °C dans le compartiment réfrigérateur • -18 °C dans le compartiment congélateur L'appareil active un mode de fonctionnement qui permet d'optimiser la conservation des aliments et la consommation d'énergie.
www.aeg.com • Le déclenchement d'une alarme sonore. Pour réinitier l'alarme : 1. Appuyez sur une touche quelconque. 2. L’alarme sonore s’éteint. 3. Le voyant de température du congélateur affiche la température maximum régnant dans le compartiment durant quelques secondes. Puis il affiche à nouveau la température programmée. 4. Le voyant alarme continue de clignoter jusqu'à ce que les conditions normales de fonctionnement soient rétablies. Une fois l'alarme rétablie, le voyant alarme s'éteint.
FRANÇAIS L'indicateur FROSTMATIC s'affiche. Cette fonction s'arrête automatiquement au bout de 52 heures. Pour désactiver la fonction avant sa désactivation automatique : 1. Appuyez sur le bouton Mode jusqu'à ce que l'indicateur FROSTMATIC clignote. 2. Appuyez sur la touche OK pour confirmer. 3. L'indicateur FROSTMATIC s'éteint. La fonction se désactive en sélectionnant une température de consigne différente. 2.14 Fonction DYNAMICAIR Pour activer la fonction : 1.
www.aeg.com AVERTISSEMENT Assurez-vous que la quantité d'aliments ne dépasse pas la charge limite indiquée sur le côté de la section supérieure (le cas échéant) En cas de décongélation accidentelle, due par exemple à une coupure de courant, si la coupure a duré plus longtemps qu'indiqué au paragraphe « Autonomie de fonctionnement » du chapitre Caractéristiques techniques, consommez rapidement les aliments décongelés ou cuisez-les immédiatement avant de les recongeler (une fois refroidis).
FRANÇAIS 11 3.8 Positionnement du bac coulissant Le bac coulissant peut être positionné à différentes hauteurs. Pour l'ajuster, procédez comme suit : 1. soulevez l'ensemble balconnet et bac coulissant pour l'extraire des supports de la porte 2. retirez la patte de fixation de la glissière située sous le balconnet 3. Pour glisser le bac coulissant à une hauteur différente, suivez cette même procédure mais dans l'ordre inverse. 3.
www.aeg.com 4. CONSEILS UTILES 4.1 Conseils pour l'économie d'énergie • N'ouvrez pas la porte trop souvent ou plus longtemps que nécessaire. • Si la température ambiante est élevée, le dispositif de réglage de température est sur la position de froid maximum et l'appareil est plein : il est possible que le compresseur fonctionne en régime continu, d'où un risque de formation excessive de givre sur l'évaporateur.
FRANÇAIS • L'identification des emballages est importante : indiquez la date de congélation du produit, et respectez la durée de conservation indiquée par le fabricant. 4.
www.aeg.com 5.3 Dégivrage du réfrigérateur En fonctionnement normal, le givre est automatiquement éliminé de l'évaporateur du compartiment réfrigérateur à chaque fois que le compresseur s'arrête. L'eau de dégivrage est collectée, via un orifice d'évacuation, dans un récipient spécial situé à l'arrière de l'appareil, audessus du compresseur, d'où elle s'évapore.
FRANÇAIS • débranchez l'appareil • retirez tous les aliments • dégivrez si nécessaire et nettoyez l'appareil ainsi que tous les accessoires • laissez la porte/les portes entrouverte(s) pour prévenir la formation d'odeurs désagréables. 15 Si, toutefois, vous n'avez pas la possibilité de débrancher et vider l'appareiI, faites vérifier régulièrement son bon fonctionnement pour éviter la détérioration des aliments en cas de panne de courant. 6.
www.aeg.com Problème Cause probable Solution La porte n'est pas correctement fermée. Reportez-vous au chapitre « Fermeture de la porte ». La porte a été ouverte trop souvent. Ne laissez pas la porte ouverte plus longtemps que nécessaire. La température du produit est trop élevée. Laissez le produit revenir à température ambiante avant de le placer dans l'appareil. La température ambiante est trop élevée. Diminuez la température ambiante.
FRANÇAIS 17 Problème Cause probable Solution La température du congélateur est trop élevée. Les produits sont trop près les uns des autres. Rangez les produits de façon à permettre la circulation de l'air froid. Il y a trop de givre. Les aliments ne sont pas correctement emballés. Emballez les aliments correctement. La porte n'est pas correctement fermée. Reportez-vous au chapitre « Fermeture de la porte ». Le thermostat n'est pas correctement réglé.
www.aeg.com Classe Température ambiante climatique SN +10 à + 32 °C N +16 à + 32 °C ST +16 à + 38 °C T +16 à + 43 °C 7.2 Branchement électrique Contrôlez, avant de brancher l'appareil, si la tension et la fréquence indiquées sur la plaque signalétique correspondent à celles de votre réseau. L'appareil doit être relié à la terre. La fiche du câble d'alimentation comporte un logement pour mise à la terre.
FRANÇAIS 19 La porte de l'appareil s'ouvre vers la droite. Pour modifier le sens d'ouverture de la porte (vers la gauche), effectuez les opérations suivantes avant d'installer définitivement l'appareil : • Dévissez, puis retirez le pivot supérieur. • Retirez la porte supérieure. • Retirez l'entretoise. • Desserrez la charnière intermédiaire. • Retirez la porte inférieure. • Dévissez, puis retirez le pivot inférieur. Du côté opposé : • Serrez le pivot inférieur. • Mettez en place la porte inférieure.
www.aeg.com 7.5 Ventilation 5 cm Veillez à garantir une circulation d'air suffisante à l'arrière de l'appareil. min. 200 cm2 min. 200 cm2 7.6 Installation de l'appareil Procédez comme suit : ATTENTION Assurez-vous que le cordon d'alimentation n'est pas coincé sous l'appareil. Si nécessaire, coupez la bande d'étanchéité adhésive puis appliquez-la sur l'appareil, comme indiqué sur la figure.
FRANÇAIS 2 1 21 Insérez l'appareil dans le meuble d'encastrement. Poussez l'appareil dans la direction indiquée par la flèche (1) jusqu'à ce que la partie couvrant l'interstice en haut de l'appareil butte contre le meuble de cuisine. Poussez l'appareil dans la direction indiquée par la flèche (2) contre le meuble, du côté opposé à la charnière. Ajustez la position de l'appareil dans le meuble d'encastrement. Assurez-vous que la distance entre l'appareil et le bord avant du meuble est de 44 mm.
www.aeg.com Retirez la pièce correcte du cachecharnière (E). Assurez-vous que vous retirez bien la pièce DX s'il s'agit de la charnière droite, SX s'il s'agit de l'autre charnière. Fixez les protections (C, D) sur les ergots et dans les trous des charnières. Mettez en place la grille d'aération (B). Fixez les cache-charnières (E) sur la charnière. C D E E B G H Placez l'appareil contre la paroi latérale du meuble de cuisine : 1.
FRANÇAIS 23 Détachez les pièces (Ha), (Hb), (Hc) et (Hd). Mettez en place la pièce (Ha) sur la face intérieure du meuble de cuisine. ca. 50 mm 90° 21 mm 90° ca. 50 mm 21 mm Poussez la pièce (Hc) sur la pièce (Ha). Ha Hc Ouvrez la porte de l'appareil et la porte du meuble de cuisine à un angle de 90°. Insérez le petit carré (Hb) dans le guide (Ha). Joignez la porte de l'appareil et la porte du meuble et repérez les trous.
www.aeg.com Retirez les supports et repérez une distance de 8 mm à partir de l'arête extérieure de la porte où le clou doit être posé (K). 8 mm K Ha Placez de nouveau le petit carré sur le guide et fixez-le à l'aide des vis fournies. Alignez la porte du meuble de cuisine et celle de l'appareil en réglant la pièce (Hb). Hb Appuyez la pièce (Hd) sur la pièce (Hb). Faites une dernière vérification pour vous assurer que : • Toutes les vis sont bien serrées.
FRANÇAIS SSS RRR ! HISSS! OK BL SSSRRR! HISSS! BLUBB! SSSRRR! HISSS! BLUBB! UB B! CLICK! BRRR! CRACK! IC CL 25 K! BRRR! CR AC K! CLICK! BRRR! CRACK!
www.aeg.com 9. CARACTÉRISTIQUES TECHNIQUES Dimensions de la niche d'encastrement Hauteur 1780 mm Largeur 560 mm Profondeur 550 mm Temps de levée 22 h Tension 230-240 V Fréquence Les caractéristiques techniques figurent sur la plaque signalétique située sur le 50 Hz côté gauche à l'intérieur de l'appareil et sur l'étiquette énergétique. 10. EN MATIÈRE DE PROTECTION DE L'ENVIRONNEMENT Recyclez les matériaux portant le symbole . Déposez les emballages dans les conteneurs prévus à cet effet.
DEUTSCH 27 INHALT 1. 2. 3. 4. 5. 6. 7. 8. 9. SICHERHEITSHINWEISE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BEDIENFELD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TÄGLICHER GEBRAUCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRAKTISCHE TIPPS UND HINWEISE . . . . . . . . . . . . . . . . . . . . . . . .
www.aeg.com 1. SICHERHEITSHINWEISE Lesen Sie zu Ihrer Sicherheit und für eine optimale Nutzung des Geräts vor der Montage und dem ersten Gebrauch das vorliegende Benutzerhandbuch einschließlich der Ratschläge und Warnungen aufmerksam durch. Es ist wichtig, dass zur Vermeidung von Fehlern und Unfällen alle Personen, die das Gerät benutzen, mit der Bedienung und den Sicherheitsvorschriften vertraut sind.
DEUTSCH Bei einer eventuellen Beschädigung des Kältekreislaufs: – Offene Flammen und Zündfunken vermeiden – Den Raum, in dem das Gerät installiert ist, gut lüften • Technische und anderweitige Änderungen am Gerät sind gefährlich. Ein defektes Netzkabel kann Kurzschlüsse und einen Brand verursachen und/ oder zu Stromschlägen führen. WARNUNG! Elektrische Bauteile (Netzkabel, Stecker, Kompressor) dürfen zur Vermeidung von Gefahren nur vom Kundendienst oder einer Fachkraft ausgewechselt werden.
www.aeg.com • Kontrollieren Sie nach dem Auspacken das Gerät auf eventuelle Beschädigungen. Nehmen Sie das Gerät nicht in Betrieb, wenn es beschädigt ist. Melden Sie die Schäden umgehend dem Händler, bei dem Sie es erworben haben. Bewahren Sie in diesem Fall die Verpackung auf. • Lassen Sie das Gerät mindestens vier Stunden stehen, bevor Sie es elektrisch anschließen, damit das Öl in den Kompressor zurückfließen kann.
DEUTSCH 7 Taste zur Erhöhung der Gefrierraum- temperatur 8 Display Der voreingestellte Tastenton lässt sich lauter einstellen. Halten Sie dazu die Taste Mode und die Taste zum Senken der Temperatur mehrere Sekunden gedrückt. Die Änderung lässt sich rückgängig machen. 2.
www.aeg.com 2.6 Temperaturregelung Die Temperatur des Kühl- und Gefrierschranks lässt sich durch Drücken des jeweiligen Temperaturreglers einstellen. Stellen Sie die Standardtemperatur ein: • +5 °C für den Kühlschrank • -18 °C für den Gefrierschrank Dadurch wird das Gerät in einem Funktionsmodus betrieben, der eine optimale Lagerung von Lebensmitteln bei minimalem Energieverbrauch ermöglicht. Zugleich ist das Betriebsgeräusch in diesem Funktionsmodus am leisesten.
DEUTSCH 4. Die Alarmanzeige blinkt so lange, bis die normalen Bedingungen wieder hergestellt sind. Danach erlischt die Alarmanzeige. schlossener Tür leer stehen lassen, ohne dass sich ein unangenehmer Geruch entwickelt. Der Kühlraum muss leer sein, wenn Sie den Urlaubsmodus nutzen wollen. 2.10 Alarm „Tür offen“ Es ertönt ein Signalton, wenn die Tür einige Minuten lang offen steht.
www.aeg.com 2.14 Funktion DYNAMICAIR Zum Einschalten der Funktion: 1. Drücken Sie die Taste Mode, bis das entsprechende Symbol angezeigt wird. Die DYNAMICAIR Anzeige blinkt. 2. Drücken Sie zur Bestätigung die Taste OK. Die DYNAMICAIR Anzeige erscheint. Zum Ausschalten der Funktion: 1. Drücken Sie die Taste Mode bis die Anzeige DYNAMICAIR blinkt. 2. Drücken Sie zur Bestätigung die Taste OK. 3. Die Anzeige DYNAMICAIR erlischt.
DEUTSCH Kam es zum Beispiel durch einen Stromausfall, der länger dauerte als der in der Tabelle mit den technischen Daten angegebene Wert (siehe „Lagerzeit bei Störung“) zu einem ungewollten Abtauen, dann müssen die aufgetauten Lebensmittel sehr rasch verbraucht oder sofort gekocht und nach dem Abkühlen erneut eingefroren werden. 3.4 Auftauen Tiefgefrorene oder gefrorene Lebensmittel können vor der Verwendung je nach der zur Verfügung stehenden Zeit im Kühlschrank oder bei Raumtemperatur aufgetaut werden.
www.aeg.com 3.8 Anbringen der verschiebbaren Schublade Die verschiebbare Schublade kann in verschiedenen Höhen eingesetzt werden. Bitte nehmen Sie diese Einstellungen wie folgt vor: 1. Heben Sie die Ablage mit der verschiebbaren Schublade an und ziehen Sie sie aus den Türhalterungen. 2. Nehmen Sie den Haltebügel aus der Führung unter der Ablage heraus. 3. Das Einsetzen in eine andere Höhe bitte in umgekehrter Reihenfolge vornehmen. 3.
DEUTSCH 37 4. PRAKTISCHE TIPPS UND HINWEISE 4.1 Energiespartipps • Öffnen Sie die Tür nicht zu häufig, und lassen Sie diese nicht länger offen als unbedingt notwendig. • Wenn die Umgebungstemperatur hoch ist und der Temperaturregler auf eine niedrige Temperatur eingestellt und das Gerät voll beladen ist, kann es zu andauerndem Betrieb des Kompressors und damit zu Reif- oder Eisbildung am Verdampfer kommen.
www.aeg.com ren, um einen genauen Überblick über die Lagerzeit zu haben. 4.5 Hinweise zur Lagerung gefrorener Produkte So erzielen Sie die besten Ergebnisse mit Ihrem Gerät: • Vergewissern Sie sich, dass die gefrorenen Lebensmittel vom Händler angemessen gelagert wurden. • Achten Sie unbedingt darauf, die eingekauften gefrorenen Lebensmittel in der kürzest möglichen Zeit in das Gefriergerät zu bringen. • Öffnen Sie die Tür nicht zu häufig, und lassen Sie die Tür nicht länger offen als notwendig.
DEUTSCH Neue Aktivkohle-Filter erhalten Sie bei Ihrem Händler vor Ort. Die Anleitung für das „Einsetzen des Kohlefilters“ beachten. 39 Bei dem Luftfilter handelt es sich um Verbrauchsmaterial, das nicht unter die Garantie fällt. 5.3 Abtauen des Kühlschranks Bei normalem Betrieb wird Reif bei jedem Anhalten des Kompressors automatisch vom Verdampfer des Kühlschranks entfernt.
www.aeg.com • trennen Sie das Gerät von der Netzversorgung • entnehmen Sie alle Lebensmittel • Tauen Sie das Gerät ab (sofern vorgesehen). Reinigen Sie den Innenraum und das gesamte Zubehör. • lassen Sie die Türen offen/angelehnt, um das Entstehen unangenehmer Gerüche zu vermeiden.
DEUTSCH Problem 41 Mögliche Ursache Abhilfe Die Tür ist nicht richtig geschlossen. Siehe hierzu „Schließen der Tür“. Die Tür wurde zu häufig geöffnet. Lassen Sie die Tür nicht länger als erforderlich offen. Die Temperatur der Lebensmittel ist zu hoch. Lassen Sie die Lebensmittel auf Raumtemperatur abkühlen, bevor Sie sie in das Gerät legen. Die Raumtemperatur ist zu hoch. Senken Sie die Raumtemperatur. Der Kompressor Das ist keine Störung, schaltet sich nicht sondern normal.
www.aeg.com Problem Mögliche Ursache Die Temperatur im Kühlschrank ist zu hoch. Die Kaltluft kann im Gerät Stellen Sie sicher, dass die nicht zirkulieren. Kaltluft im Gerät zirkulieren kann. Abhilfe Die Temperatur im Gefrierraum ist zu hoch. Die Lebensmittel liegen zu dicht aneinander. Lagern Sie die Lebensmittel so, dass die Kaltluft im Gerät zirkulieren kann. Es bildet sich zu viel Reif oder Eis. Die Lebensmittel sind nicht richtig verpackt. Verpacken Sie die Lebensmittel richtig.
DEUTSCH 43 7. MONTAGE WARNUNG! Lesen Sie bitte die "Sicherheitshinweise" sorgfältig vor der Aufstellung des Geräts durch, um Gefahren für Sie selbst zu vermeiden und einen korrekten Betrieb des Geräts zu gewährleisten. 7.
www.aeg.com Die Tür des Geräts öffnet sich nach rechts. Wenn die Tür sich nach links öffnen soll, gehen Sie vor der Montage des Geräts bitte nach den folgenden Anweisungen vor: • Lösen und entfernen Sie den oberen Bolzen. • Entfernen Sie die obere Tür. • Nehmen Sie das Distanzstück ab. • Lösen Sie das mittlere Scharnier. • Entfernen Sie die untere Tür. • Lösen und entfernen Sie den unteren Bolzen. Auf der gegenüberliegenden Seite: • Ziehen Sie den unteren Bolzen fest. • Bringen Sie die untere Tür an.
DEUTSCH 45 7.5 Anforderungen an die Belüftung 5 cm Hinter dem Gerät muss genug Platz für eine ausreichende Luftzirkulation sein. min. 200 cm2 min. 200 cm2 Gehen Sie wie folgt vor: 7.6 Installation des Geräts VORSICHT! Vergewissern Sie sich, dass sich das Netzkabel des Gerätes frei bewegen kann. Schneiden Sie bei Bedarf den Dichtungsstreifen zu und bringen Sie ihn, wie in der Abbildung gezeigt, am Gerät an.
www.aeg.com 2 1 Setzen Sie das Gerät in die Einbaunische. Schieben Sie das Gerät in Pfeilrichtung (1), bis die obere Spaltabdeckung am Küchenmöbel anliegt. Schieben Sie das Gerät auf der den Scharnieren gegenüberliegenden Seite in Pfeilrichtung (2) soweit wie möglich gegen die Seitenwand des Küchenmöbels. Richten Sie das Gerät in der Einbaunische aus. Vergewissern Sie sich, dass der Abstand zwischen dem Gerät und der Schrankvorderkante 44 mm beträgt.
DEUTSCH 47 Entfernen Sie das entsprechende Teil aus der Scharnierabdeckung (E). Achten Sie darauf, im Falle eines rechten Scharniers Teil DX bzw. bei einem gegenüberliegenden Scharnier Teil SX zu entfernen. Setzen Sie die beiliegenden Abdeckkappen (C, D) in die Befestigungs- und Scharnierlöcher ein. Bauen Sie das Belüftungsgitter (B) ein. Stecken Sie die Scharnierabdeckungen (E) auf das Scharnier auf. C D E E B G H Schließen Sie das Gerät seitlich wie folgt an das Küchenmöbel an: 1.
www.aeg.com Trennen Sie die Teile (Ha), (Hb), (Hc) und (Hd) ab. Montieren Sie die Führungsschiene (Ha) an der Innenseite der Tür des Küchenmöbels. ca. 50 mm 90° 21 mm 90° ca. 50 mm 21 mm Drücken Sie das Teil (Hc) auf das Teil (Ha). Ha Hc Öffnen Sie die Gerätetür und die Möbeltüre in einem Winkel von 90°. Setzen Sie das Führungsstück (Hb) in die Führungsschiene (Ha) ein. Halten Sie die Gerätetür an die Tür des Küchenmöbels, und markieren Sie die Bohrungen.
DEUTSCH 49 Nehmen Sie die Halterungen wieder ab. Markieren Sie 8 mm ab der Türaußenkante die Stelle, an der der Nagel (K) eingesetzt werden muss. 8 mm K Ha Setzen Sie das Führungsstück erneut auf die Führungsschiene und schrauben Sie es mit den mitgelieferten Schrauben fest. Richten Sie die Tür des Einbaumöbels und die Gerätetür mit dem Führungsstück (Hb) aus. Hb Drücken Sie Abdeckung (Hd) auf das Führungsstück (Hb).
www.aeg.
DEUTSCH 9. TECHNISCHE DATEN Abmessung der Aussparung Höhe 1780 mm Breite 560 mm Tiefe 550 mm Ausfalldauer 22 h Spannung 230-240 V Frequenz 50 Hz Die technischen Informationen befinden sich auf dem Typenschild innen links im Gerät sowie auf der Energieplakette. 10. UMWELTTIPPS Recyceln Sie Materialien mit dem Symbol . Entsorgen Sie die Verpackung in den entsprechenden Recyclingbehältern. Recyceln Sie zum Umwelt- und Gesundheitsschutz elektrische und elektronische Geräte.
222368746-A-202013 www.aeg.