User manual
17
Gefrierkalender
• Die Symbole zeigen unterschiedliche Arten von Tiefkühlgut.
• Die Zahlen geben für die jeweilige Art von Tiefkühlgut die Lagerzeit in
Monaten an. Ob der obere oder der untere Wert der angegebenen Lager-
zeiten gültig ist, hängt von der Qualität der Lebensmittel und deren Vor-
behandlung vor dem Einfrieren ab. Für Lebensmittel mit hohem Fettanteil
gilt immer der untere Wert.
Abtauen
Kühlraum
Die Rückwand des Kühlraums bereift, während der Kompressor läuft, und
taut vollautomatisch ab, während der Kompressor stillsteht. Das Tauwasser
wird in der Ablaufrinne an der Rückwand des Kühlraumes aufgefangen,
durch das Ablaufloch in die Auffangschale am Kompressor geleitet und dort
verdunstet.
Gefrierfach
Im Gefrierraum schlägt sich während des Betriebs und beim Öffnen der Tür
Feuchtigkeit als Reif nieder. Entfernen Sie diesen Reif von Zeit zu Zeit mit
einem Kunststoffschaber. Starke Reifbildung im Gefrierfach erhöht den
Energieverbrauch. Deshalb soll abgetaut werden, wenn die Reifsicht eine
Dicke von ca. 4 Millimeter erreicht hat; mindestens jedoch einmal im Jahr.
Ein geeigneter Zeitpunkt zum Abtauen ist auch immer dann, wenn das
Gerät leer oder nur wenig beladen ist Um ein vollständiges Abtauen durch-
zuführen, geht man wie folgt vor:
1. Den Thermostatknopf auf «O» ein-
stellen oder den Stecker aus der
Steckdose herausziehen.
2. Die eventuell im Frosterfach liegen-
den Lebensmittel herausnehmen, sie
in Zeitungspapier einwickeln und
sehr kühl aufbewahren.
3. Die Tür offen lassen. Ein Gefäß auf die
erste Ablage direkt unter das Ablau-
floch stellen. Den Stöpsel wie in der
Abbildung gezeigt entfernen.
PR151
28
Installation
Installation Location
The appliance should be set up in a well ventilated, dry room.
Energy use is affected by the ambient temperature. The appliance should
therefore
– not be exposed to direct sunlight;
– not be installed next to radiators, cookers or other sources of heat;
– only be installed at a location whose ambient temperature corresponds to
the climate classification, for which the appliance is designed.
The climate classification can be found on the serial plate, which is located
at the left on the inside of the appliance.
The following table shows which ambient temperature is correct for each
climate classification: each climate classification:
Climate classification
for an ambient temperature of
SN +10 bis +32 °C
N +16 bis +32 °C
ST +18 bis +38 °C
T +18 bis +43 °C
If installation next to a source of heat is unavoidable, the following mini-
mum clearances must be maintained at the sides of the appliance:
– for electric cookers 3 cm;
– for oil and coal fired ranges 30 cm.
If these clearances cannot be maintained a heat insulating pad is required
between the cooker and the refrigeration appliance.
If the refrigeration appliance is installed next to another refrigerator or free-
zer a clearance of 5 cm at the sides is required, in order to prevent the for-
mation of condensation on the outside of the appliance.