User manual

4
Contents
English Manual 3
1. The CS121 family - Introduction 6
1.1 About your CS121 6
1.1.1 General information 6
1.1.2 Functionalities of your CS121 6
1.2 About the communication with the CS121-Adapter 8
1.3 The CS121 Adapter Package 8
1.4 Comparison 10
1.5 CS121 overview 11
1.6 A typical installation - CS121 in a network environment 12
1.7 Connect your CS121 ... 13
1.7.1 ... via serial port 13
1.7.2 ... via LAN 14
1.8 Verifying the CS121 connectivity 14
2. Quickstart 15
2.1 Setting up basic network configuration 15
2.1.1 Using HTTP/Webbrowser 16
2.1.2 Using Telnet / MS-HyperTerminal 17
2.1.2.1 Building up a connection 17
2.1.2.2 Main menu & IP-Settings 18
2.1.2.3 UPS Settings 19
2.1.2.4 Save configuration 20
2.2 Adapter-restart and boot procedure 20
2.3 Introduction in the event configuration 20
2.3.1 About same basic events 21
2.3.2 Quickguide to install an RCCMD-job 21
3. Configuration of the CS121 23
3.1 CS121 Status-Monitors 23
3.2 Configuration 24
3.2.1 UPS Model & System 24
3.2.2 Network & Security 26
3.2.3 Email 27
3.2.4 Timeserver 28
3.2.5 Events / Alarms 29
3.2.5.1 Treshold events 31
3.2.5.2 Logfile entries 31
3.2.5.3 Email-Job 32
3.2.5.4 RCCMD Jobs 32
3.2.5.4.1 RCCMD Shutdown 34
3.2.5.4.2 RCCMD Message 34
3.2.5.4.3 RCCMD Execute/command 35
3.2.5.4.4 Example of use 1: CS121-adapter as RCCMD-listener 35
3.2.5.4.5 Example of use 2: CS121-adapter switches an output 35
3.2.5.4.6 RCCMD Trap 36
3.2.5.5 UPS shutdown 37
3.2.5.6 AUX-Port 37
3.2.5.7 Wake on LAN (WOL) 38
3.2.6 Scheduled Actions 38
3.2.7 SNMP 38
3.2.8 COM2 & AUX 39
3.2.8.1 COM2 39
3.2.8.2 AUX and SITESWITCH4 Settings 41
3.2.9 SENSORMANAGER 42
3.2.10 RAS Configuration 43
3.2.11 Save Configuration / Reboot 44