User manual

01/17/2007,16:35:51,MAIL: subject "CS121 Event 44" successfully sent

01/17/2007,16:35:57,MAIL: subject "CS121 Event 45" successfully sent

These are 8 Emails sending information about analogue sensors (temperature, humidity and

the like) that are connected to a SENSORMANAGER, indicating that all controlled values are

within tolerance levels - or that no sensor is connected to the device or connection port.

01/17/2007,16:36:30,MAIL: subject "CS121 Event 54" successfully sent

01/17/2007,16:36:41,MAIL: subject "CS121 Event 55" successfully sent

01/17/2007,16:36:48,MAIL: subject "CS121 Event 56" successfully sent

01/17/2007,16:36:57,MAIL: subject "CS121 Event 57" successfully sent

These 4 Emails indicate that the digital sensors (for airconditioning, fire alarms and the like) of

the SENSORMANAGER, are either in the normal state or that no sensor is connected.

01/17/2007,17:41:12,MAIL: subject "CS121 Event 62" successfully sent

01/17/2007,17:41:36,MAIL: subject "CS121 Event 63" successfully sent

01/17/2007,17:43:23,MAIL: subject "CS121 Event 64" successfully sent

01/17/2007,17:44:01,MAIL: subject "CS121 Event 65" successfully sent

These 4 Emails indicate the status of the digital alarm contacts of the sensors (for Emergency

OFF, fire extinguisher and the like) connected with the SENSORMANAGER, showing either

the status is NORMAL or that nothing is connected.

01/17/2007,17:52:13,MAIL: subject "CS121 Event 70" successfully sent

This Email shows that no SENSORMANAGER is connected although the CS121 is configured

as having a connection to a Sensormanager. This informs the ADMIN that the CS121 is

incorrectly configured. In this case, the user should correct the settings.