Operation Manual

English
45
4. Press the II key (12). The playback starts. The  rst
track number selected appears in the display and 
or  MP3 and PROG. light up. Press this button to
pause brie y the playback.
5. Press once the STOP key to stop the playback while
retaining the program.
6. To play the programme back again, press the II but-
ton.
7. To delete the program, press the STOP key twice. The
PROG control lamp goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The abbreviation
PROG goes o and the programmed order of tracks is
deleted from the memory.
It is also possible to combine the programmed tracks
with the REPEAT function. After you have programmed
and started the device, please press the MODE button
(15) up to three times and then you can use the func-
tions as described under MODE“.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of mu-
sic in MP3 format. The device also supports all standard
CD types: CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200
tracks can be compressed and stored on these CDs. Your
machine detects an MP3 CD automatically (the total
number of tracks and MP3s appears in the display). If you
would like to play one of these CDs, proceed as described
under „Playing CDs/MP3“. Tracks can be programmed as
described under „Playing Back Programmed Tracks“.
Please note:
There are a number of di erent recording and compres-
sion methods, as well as quality di erences between CDs
and self-recorded CDs.
Furthermore, the music industry does not adhere to  xed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is
not a malfunction of the device.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped o with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not inserted
or inserted incor-
rectly.
Ensure that the
disc is inserted
with the label
facing upwards.
Batteries too
weak.
Insert new bat-
teries or operate
the device with
the mains lead.
CD jumps during
playback.
Check the disc
for  ngerprints,
dirt or scratches.
Check the disc
for  ngerprints,
dirt or scratches.
Memory card
does not play
back or cannot be
selected.
A USB storage
medium is
connected at the
same time.
Remove the USB
storage medium.
Technical Data
Model: ................................................................ SR 4327 CD/MP3
Power supply: ....................................................220-240 V, 50 Hz
Battery operation: .............................8 x 1,5 V, Type UM2/R14
Power consumption:...............................................................18 W
Protection class: ..............................................................................ΙΙ
Net weight: ............................................................................2,05 kg
Radio section:
Frequency ranges: ................VHF / FM 87,5 ~ 108,0 MHz
..................MW / AM 530 ~ 1640 kHz
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no long-
er use to the collection points provided for their disposal.
This helps avoid the potential e ects of incorrect dis-
posal on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.
05-SR 4327 AEG.indd 4505-SR 4327 AEG.indd 45 23.03.2009 14:32:37 Uhr23.03.2009 14:32:37 Uhr