Operation Manual
38
ENGLISH
Press twice = all functions are cancelled. The nor-
mal play mode is resumed.
Programmed Play
This can be used to program any desired sequence of
tracks.
1. Press the STOP key (10).
2. Press the PROG key (12) “01” (storage location) and
the indicator lamp (23) ash on the display. Use
SKIP+/SKIP- buttons (8/9) to select the desired track
and then press the PROG button again. The display
changes to memory slot 02.
3. Select the next track with the SKIP+/SKIP- key and
press the PROG key again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
When the storage capacity of the titles to be pro-
grammed has been reached, the storage location 01
etc. is replaced.
4. Press the PLAY/PAUSE key (11). The playback starts.
The display shows the rst selected title number. The
indicator lamp (23) ashes. Press this button to pause
briely the playback.
5. Press once the STOP key to stop the playback while
retaining the program. The indicator lamp (23) contin-
ues to ash.
6. To play the programme back again, press the PLAY/
PAUSE button.
7. To delete the program, press the STOP key twice. The
indicator lamp (23) goes out.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence is kept in memory until you switch to a dierent
mode or until the CD or the storage device is removed or
the unit is switched o.
It is also possible to combine the programmed tracks with
the REPEAT function. After you have programmed and
started the device, please press the REPEAT button (13)
up to three times and then you can use the functions as
described under “REPEAT“.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped o with a
slightly damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not inserted
or inserted incor-
rectly.
Ensure that the disc is
inserted with the label
facing upwards.
Batteries too
weak
Insert new batteries
or operate the device
with the mains lead.
CD jumps dur-
ing playback.
Check the disc
for ingerprints,
dirt or scratches.
Check the disc for
ingerprints, dirt or
scratches.
The unit does
not work.
The unit is
blocked and
“hangs”.
Disconnect the mains
plug for approximately
5 seconds. Then switch
the unit back on.
Technical Data
Model: ................................................................................ SR 4334 CD
Power supply: .......................................................220-240 V, 50 Hz
Battery operation: ................................6 x 1.5 V, Type UM2/R14
Power consumption: ..................................................................12 W
Protection class: ...................................................................................II
Net weight: ................................................................................1.42 kg
Radio section:
Frequency ranges:......................... VHF/FM 88 ~ 108.0 MHz
........................MW/AM 540 ~ 1600 KHz
Subject to technical changes without prior notice!
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Disposal/Meaning of the “Dustbin” Symb
Protect our environment: do not dispose of electrical
equipment in the domestic waste.
Please return any electrical equipment that you will no
longer use to the collection points provided for their
disposal.
This helps avoid the potential eects of incorrect disposal
on the environment and human health.
This will contribute to the recycling and other forms of
reutilisation of electrical and electronic equipment.
Information concerning where the equipment can be
disposed of can be obtained from your local authority.