Operation Manual

English
23
Turnthedeviceon.
Slidetheoperatingmodeswitch(3)totheCDposition.
OpentheCDtray(9)byslightlypressingontheright
front (11).
InsertaCDintothedevicewiththelabelontop.Ensure
that the CD locks in on the centring taper.
ClosetheCDtray(9)bypressingitshutuntilitlocksinto
place.
When the CD is inserted, the total number of the CD titles
will be displayed. The display will also show you whether it
pertains to an audio CD or an MP3 CD. If you press the
button (replay/pause) (13), the replay will start.
To remove a CD, please proceed as follows:
Pressthe
stop button (12).
OpentheCDtray(11)byslightlypressingonthefront
right (11).
CarefullyremovetheCDfromthecentringtaper.
ClosetheCDtray.
NOTE:
If you insert a CD upside down or if it is not readable,
then the display will read no.
The replay of self-produced CD’s can not be guaranteed
due to different burn programs and storage media.
Description of the CD buttons
button (Replay/Pause) (13)
By pressing this button during the replay you may stop the
replay. If you press the button again, the replay will continue.
/ buttons (Search run forward/backwards) (14/17) With
these buttons you can affect the music replay in the CD/USB
mode.
You can use the button to skip a title and to change to the
next title.To do this, please proceed as follows:
Pressthebuttonbrieytoskiptothenexttitle.
Bypressingdownandholdingthebutton,themusic
search is activated. The title is not changed but is wound
forward in fast forward mode.
With the
button you wil proceed as follows:
Pressingit1x,willchangeittothestartofthecurrenttitle.
Bypressingit2x,itwillchangetotheprevioustitle.
Pressingit1xandholdingitdownwillactivatethemusic
search run backwards.
REPEAT (19) button
This button enables you to set different options of music
replay. To do this, procced as follows:
Pressing1xrepeatsthecurrenttitleuntilthefunctionis
deactivated. ONE will be shown in the display.
Pressing2xwillreplaytheentireCDuntilthefunctionis
deactivated. ALL will be shown in the display.
If the button is pressed again, the function is deactivated
again. The replay will run in the normal mode.
Programmed playback
Allows the programming of any desired order of selections.
To program the order of selections, please proceed as fol-
lows:
Insertamusicmedium(Audio–CD/MP3-CD/USB
stick)
PressthePRG(18)button.“001”willappearinthe
display.
Nowselecttherequestedtitlewiththe
/ buttons
(14/17).
PressthePRG(18)buttonagain.002willappearinthe
display
Selectanothertitle.
Proceedthesamewaywiththefurtherprogramming.
Youwillstarttheplaybackwiththe button (13).
To delete the programming, press the
button (12).
Bluetooth Streaming/AUX
To playback music through the Bluetooth or AUX, please
proceed as follows:
Slidetheoperatingmodeswitch(3)totheBluetooth/
AUX position.
PairyourmusicoutputdevicewithBluetoothwiththe
device. The Bluetooth password of the device is 0000.
You may alternately connect the music output source by
using a 3.5 mm jstereo jack plug with the AUX terminal (11)
of the device.
Selectthedesiredmusictitles.
Starttheplayback.
NOTE:
Before you start the replay, ensure a moderate output
volume of the music source and of the device. Adjust
the volume later on.
Cleaning and maintenance
To clean the device, please proceed as follows:
Separatethedevicefromthemains.
Wipetheoutersurfacesofthedevicewithadrytowel
without any cleaning additives.
Troubleshooting
Symptoms Cause Solution
CD can not be
played back.
CD has not been
inserted correctly.
Ensure that the CD
has been inserted
correctly.
CD skips during
the playback.
CD is dirty. Clean the CD with
a soft, dry towel.