Operation Manual

English
33
REPEAT (14)
When audio CD is playing:
Press once = the current track is repeated continuously.
The indicator lamp (17) flashes.
Press twice = the whole CD is played continuously. The
indicator lamp (17) is lit.
Press three times = all functions are cancelled. The normal
play mode is resumed. The indicator
lamp (17) goes out.
RANDOM (12)
Press once = The display shows the title number, which
will be played first. All tracks are played
back in random order. If function is activat-
ed, the current title and a rotation of the
segment lighting are shown alternately.
Press twice = all functions are cancelled. The normal
play mode is resumed.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the
STOP button (19).
2. Press the PROGRAM button (13). “01” (storage location)
and the indicator lamp (16) flash on the display. Use
NEXT/ BACK buttons (11/15) to select the desired track
and then press the PROGRAM button again. The display
changes to memory slot 02.
3. Select the next track with the NEXT/ BACK but-
ton and press the PROGRAM button again. Repeat the
procedure until all the desired tracks are selected.
NOTE:
If the storage capacity of the titles to be programmed is
reached, the preset location 01 will be shown.
4. Press the
button (7). The playback starts. The display
shows the first selected title number. The indicator lamp
PROG. (16) is lit.
5. Press once the STOP button to stop the playback while
retaining the program. The indicator lamp PROG. (16) will
continue to lit.
6. To play the programme back again, press the button.
7. To delete the program, press the STOP button twice.
The indicator lamp (16) goes out.
The device stops automatically once the entire sequence of
programmed tracks is completed. The indicator lamp PROG.
(16) will go out and the programmed sequence will be de-
leted from the memory.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course Solution
CD can not be
played back.
CD is not inserted
or inserted incor-
rectly.
Ensure that the disc is
inserted with the label
facing upwards.
Batteries too weak. Insert new batteries
or operate the device
with the mains lead.
CD jumps dur-
ing playback.
Check the disc for
ingerprints, dirt or
scratches.
Check the disc for
ingerprints, dirt or
scratches.
The unit does
not work.
The unit is blocked
and “hangs”.
Disconnect the mains
plug for approximately
5 seconds. Then
switch the unit back
on.
NOTE: Automatic Standby switch
In order to comply with the “ErP 2 (Energy-related
Products)” Ecodesign Directive (2009/125/EC) that aims
at animproved energy efficiency and general environmen-
tal compatibility, the device will automatically switch to
standby after a certain amount of time without a signal. To
use the device again, keep the / button (7) pressed
down for a brief amount of time.
Technical Data
Model: ............................................................................ SR 4351 CD
Power supply: ................................................................ 230 V, 50 Hz
Battery operation: ..................................6 x 1.5 V, Type UM2/R 14
Power consumption:.................................................................12 W
Protection class: ................................................................................ II
Net weight: ............................................................................. 1.18 kg
Radio section:
Frequency ranges:..........................................FM 88 ~ 108.0 MHz
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.