Operation Manual

English
47
Troubleshooting
Problem Cause Solution
The unit cannot
be operated
The unit is blocked
and “hangs”
Pull the mains plug
forapproximately5
seconds. Then connect
the unit again
Reset the device to the
factory defaults.
see
“Settings menu”
No DAB Radio
reception
Telescopic antenna
incorrectly aligned
Fullyextendthe
telescopic antenna and
align it vertically.
No Digital Radio
can be received in
your area
Problems with
DAB radio
reception
Depending on
the location, you
may not be able
to receive some
stations at all or
with interference in
your region.
see
also note on page
44
Switch to FM mode to
receive these stations.
If these stations are
transmitted via VHF.
Find out more on the
internet site of the
radio station.
No sound Volume is too low Increase the volume
Poor sound
quality
Radio signal too
weak
Try to adjust the anten
-
na position.
Alarm function
without sound
Volume too low Increase the volume
using the control (7).
No audio
signal during
bluetooth
connection.
The device is not
registered with the
audio source.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Volume too low. Increase the volume on
the device.
Increase the volume on
the audio source.
Device can not
be connected.
Registration does
not work.
Check to see if the
audio source supports
the A2DP protocol.
Audio source is
shut off.
Turn on the audio
source.
Bluetooth is shut
off on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Bluetooth version
is not supported.
Use a different play
-
back device.
Display lights
up constantly
during standby
mode.
One of the buttons
has been pressed
in standby mode.
Press the ALARM/
SNOOZE button. After
approx.10seconds
the display will be
dimmed.
Technical Data
Model: ................................................................ SR 4372 BT/DAB+
Power supply: ............................................... 100-240 V~, 50/60 Hz
USB operating voltage: .................................................DC 5 V, 1 A
Power consumption:.................................................................24 W
Protection Class: ............................................................................... II
Net weight: ..............................................................approx.1.43kg
Radio:
Frequency ranges:… ..................VHF/FM 87.5 ~ 108.0 MHz
........ DAB/DAB + 174.92 ~ 239.20 MHz
Bluetooth
Bluetooth support: ........................................................V2.1 + EDR
Range: ..................................................................approx.15metres
Transmission frequency: ......................................2.402-2.480 GHz
Protocols: ....................................................................A2DP/AVRCP
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device complies with all current CE directives, such as
electromagnetic compatibility and low voltage directive and
is manufactured according to the latest safety regulations.
Disposal
Meaning of the “Wheelie Bin” Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that you
will no longer use to the collection points provid-
ed for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili
-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Problem Cause Solution