Operation Manual

English
33
SR4842BTS_IM 23.09.16
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect
the devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi- / and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for devic-
es (e. g. mobile phones) getting released in the future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav
-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music re
-
ceives a call, the music will be interrupted. Press the /
button to receive the call. The sound will be played
back through the radio. Speak towards the microphone
or transfer the call to your mobile phone. When doing
this, please refer to the fade-in on the display of your
mobile phone. After you have terminated the phone
call, the playback will resume.
• When the devices get disconnected, the speaker will
announce “SPEAKERS DISCONNECTED”. “
“
flashes in the display.
Description of the Control Buttons
NOTE:
• Not all the functions may be supported depending on
the playback device.
• Depending on the device, you must start the music app
on your playback device beforehand.
/ (4)
• Bluetooth music
You can briefly interrupt and resume playback using this
button. Pressing again continues playback.
• Speakerphone operation
- Press the button to answer or finish an incoming call.
- Press and hold this button to reject an incoming call.
(3)
Press once = Starts the current title again from the
beginning.
Press twice = Jumps to the preceding title.
Press three times = Plays a preceding title, etc.
(5)
You can use this button to jump to the next or overnext title
etc.
Cleaning
CAUTION:
Do not immerse the device in water.
• Disconnect the mains plug before cleaning.
• You may wipe off external stains, using a slightly damp
cloth without any additives.
Troubleshooting
Problem Cause Solution
The unit
cannot be
operated.
The unit is
blocked and
“hangs”.
Disconnect the power
supply for 5 seconds.
Then switch the
device on again.
No sound. Volume is too
low.
Increase the volume.
Poor sound
quality.
Radio signal too
weak.
Try to adjust the
antenna position.
No audio
signal during
bluetooth
connection.
The device is not
registered with
the audio source.
Ensure that there is a
connection. Register
the device with the
audio source again, if
necessary.
Volume too low. Increase the volume
on the device.
Increase the volume
on the audio source.
Device can
not be con
-
nected.
Registration does
not work.
Check to see if the
audio source supports
the A2DP protocol.
Audio source is
shut off.
Turn on the audio
source.
Bluetooth is shut
off on the audio
source.
Turn on the Bluetooth
function on the audio
source.
Bluetooth version
is not supported.
Use a different play
-
back device.