Operation Manual

61
English
Delete program
Select the row “Delete” within the program you would like
to delete.
Press the OK key to highlight the program.
The program will be deleted automatically.
Press the
SETUP key (Fig. 4/1), to exit the set up menu.
TV Setting
TV System
Coordinate the output of the device with the color transmission
system of you display device.
PAL: System is primarily used in Europe.
AUTO: If your device is a multi system device use this
setting.
NTSC: System is primarily used in North America.
TV Type
Here you may adjust the output of the DVB-receiver to match
the aspect ration of your display device.
4:3 PS: You may only view the center area of the movie.
The edges are cut off. (“Pan-Scan”).
4:3 LB: You may view the entire range of the movie in a
reduced version; therefore a black bar appears on the top
and bottom of the screen. (“Letter-Box”).
16:9: Choose this option if you have a wide-screen TV.
Keep in mind that movies recorded in an aspect ratio of 4:3
will display in the same 4:3 ratio. Therefore it will not popu-
late the entire screen of the wide-screen TV.
Language
OSD Language
Choose the language for the DVB-T menu.
Parent Control
Change PIN
Choose a PIN which must be entered when Parent Control is
activated.
To change the password you must enter the current password.
The default password is “0000”.
Note:
Remember your password. Without this password you can
no longer access the locked programs.
To change the password proceed as:
Enter the current password on the line “Old PIN”, using the
number keys (Fig. 4/3) on the remote control.
To prevent access to unauthorized individuals the password
is displayed on screen as “
****
”.
1.
2.
3.
1.
System Settings
Adjust the settings for the video signal.
Video setting