DE Benutzerinformation Wäschetrockner LAVATHERM 55370AH3
www.aeg.com INHALTSVERZEICHNIS 1. SICHERHEITSHINWEISE.................................................................................................3 2. SICHERHEITSANWEISUNGEN...................................................................................... 6 3. GERÄTEBESCHREIBUNG...............................................................................................8 4. ZUBEHÖR..................................................................................................................
DEUTSCH 1. 3 SICHERHEITSHINWEISE Lesen Sie vor der Montage und dem Gebrauch des Geräts zuerst die Gebrauchsanleitung. Der Hersteller übernimmt keine Verantwortung für Verletzungen und Beschädigungen durch unsachgemäße Montage. Bewahren Sie die Gebrauchsanleitung griffbereit auf. - Lesen Sie bitte die mitgelieferte Anleitung. 1.1 Allgemeine Sicherheit • • • • • • Nehmen Sie keine technischen Änderungen am Gerät vor.
www.aeg.com • • • • • • • • • • • Der Raum, in dem das Gerät aufgestellt wird, muss gut belüftet sein, damit keine Gase in den Raum zurückströmen, die von offenem Feuer oder von anderen Geräten stammen, die mit Brennstoffen arbeiten. Die Abluft darf nicht über denselben Abzug abgeleitet werden, durch den der Dunstabzug von mit Gas oder sonstigen Brennstoffen betriebenen Geräten gewährleistet wird.
DEUTSCH • • • • 5 Entfernen Sie alle Gegenstände, wie Feuerzeuge und Streichhölzer, aus den Taschen. Wenn Sie die Trockentrommel vor dem Ende des Trockengangs anhalten müssen, entnehmen Sie bitte sofort die gesamte Wäsche und breiten Sie diese zur Wärmeableitung aus. Der letzte Teil eines Trockenprogramms findet ohne Hitze statt (Abkühlzyklus), um sicherzustellen, dass die Wäsche auf einer Temperatur bleibt, bei der sie nicht beschädigt wird.
www.aeg.com • Wartung oder Reinigung des Geräts dürfen nicht von Kindern ohne Aufsicht erfolgen. 2. SICHERHEITSANWEISUNGEN 2.1 Montage • Entfernen Sie das Verpackungsmaterial. • Stellen Sie ein beschädigtes Gerät nicht auf und benutzen Sie es nicht. • Halten Sie sich an die mitgelieferte Montageanleitung. • Seien Sie beim Umsetzen des Geräts vorsichtig, denn es ist schwer. Tragen Sie stets Sicherheitshandschuhe.
DEUTSCH • Trocknen Sie keine tropfnassen Wäschestücke im Trockner. 2.4 Reinigung und Pflege WARNUNG! Verletzungsgefahr sowie Risiko von Schäden am Gerät. • Reinigen Sie das Gerät nicht mit einem Wasser- oder Dampfstrahl. • Reinigen Sie das Gerät mit einem weichen, feuchten Tuch. Verwenden Sie ausschließlich Neutralreiniger Benutzen Sie keine Scheuermittel, scheuernde Reinigungsschwämmchen, Lösungsmittel oder Metallgegenstände. 2.5 Kompressor WARNUNG! Das Gerät könnte beschädigt werden.
www.aeg.com 3. GERÄTEBESCHREIBUNG 1 2 3 4 11 5 10 6 9 7 8 1 2 3 4 5 6 7 8 9 Wasserbehälter Bedienfeld Gerätetür Filter Taste zum Öffnen der Wärmetauschertür Luftschlitze Schraubfüße Zugangstür zum Wärmetauscher Wärmetauscherabdeckung 10 Taste zum Verriegeln der Wärmetauscherabdeckung 11 Typenschild Die Einfülltür kann vom Benutzer an der gegenüberliegenden Seite angebracht werden. So kann die Wäsche in einigen Fällen einfacher eingelegt und entnommen werden (siehe separate Broschüre).
DEUTSCH 9 4. ZUBEHÖR 4.1 Bausatz Wasch-TrockenSäule Zubehörbezeichnung: DK11. Erhältlich bei Ihrem autorisierten Händler (kann bei einigen Modellen des Wäschetrockners angebracht werden) Zubehör für die Ableitung des Kondenswassers in ein Waschbecken, einen Siphon, einen Gully o. ä. Nach der Montage wird der Wasserbehälter automatisch geleert. Der Wasserbehälter muss im Gerät bleiben. Der Schlauch muss mindestens 50 cm und höchstens 1 m über dem Boden installiert werden.
www.aeg.com 5. BEDIENFELD 1 1 2 3 4 5 6 7 2 3 Programmwahlschalter Taste Ein/Aus Taste Reverse Plus Taste Signal Taste Knitterschutz Taste Zeitvorwahl 6h Kontrolllampen: 4 5 6 7 8 9 Behälter - Wasserbehälter leeren 8 Taste Start/Pause 9 Phasenkontrolllampen: Trocknen Abkühen Knitterschutz/Ende Sieb - Filter reinigen Kondensator - Prüfung des Wärmetauschers 6. PROGRAMMTABELLE Bela- Programme Wäschetyp / Pflegesymbol dung 1) Baumwolle Extratrocken 7 kg Trockengrad: Extratrocken.
DEUTSCH Programme Bela- 11 Wäschetyp / Pflegesymbol dung 1) Jeans 7 kg Zum Trocknen von Freizeitkleidung wie Jeans, Sweatshirts mit unterschiedlicher Materialstärke (z. B. / am Kragen, an den Manschetten und Nähten). Daunenkissen 3 kg Zum Trocknen von 1-2 Bettdecken und Kopfkissen (mit Feder-, Daunen- oder Synthetikfüllung). Wollpflege 1 kg Auffrischen von Wolltextilien. Die Wolltextilien werden weich und anschmiegsam.
www.aeg.com 6.1 Programm- und Optionsauswahl Optionen Programme 1) Reverse Plus Knitterschutz Baumwolle; Extratrocken Baumwolle; Schranktrocken + Baumwolle; Schranktrocken Baumwolle; Bügeltrocken Jeans Daunenkissen Wollpflege Mischgewebe; Extratrocken Mischgewebe; Schranktrocken Mischgewebe; Bügeltrocken Leichtbügeln Sportkleidung 60 min. 30 min. 1) Sie können zusammen mit dem Programm eine oder mehrere Optionen wählen. 6.
DEUTSCH 13 7. OPTIONEN 7.1 Reverse Plus 7.3 Knitterschutz Zum sanften Trocknen empfindlicher und temperaturempfindlicher Textilien (z. B. Acryl, Viskose). Mit dieser Option kommt die Wäsche beinahe knitterfrei aus der Maschine. Für Textilien mit dem Symbol Verlängert die Knitterschutzphase (30 Minuten) am Ende des Trockenprogramms auf 90 Minuten. Diese Option beugt Knitterfalten in den Textilien vor. Während der Knitterschutzphase kann Wäsche entnommen werden. auf dem Etikett. 7.
www.aeg.com • Drehen Sie Wäschestücke mit Baumwollfutter auf links. Vergewissern Sie sich unbedingt, dass das Baumwollfutter außen ist. • Wir empfehlen, die zu trocknende Gewebeart bei der Programmeinstellung zu berücksichtigen. • Bunte und helle Textilien sollten nicht zusammen getrocknet werden. Kräftige Farben können auf hellere abfärben. • Achten Sie auf die Auswahl von geeigneten Programmen für Textiletikett Trikotwäsche und Strickwaren, um das Einlaufen der Wäsche zu verhindern.
DEUTSCH 9.6 Optionen Sie können zusammen mit dem Programm eine oder mehrere Optionen wählen. Zum Ein- oder Ausschalten der Option die entsprechende Taste drücken . Ist die Option eingeschaltet, leuchtet die Kontrolllampe über der Taste auf. 9.7 Starten eines Programms So starten Sie das Programm: 15 9.9 Programmende Reinigen Sie den Filter und entleeren Sie den Wasserbehälter nach jedem Trockengang. (Siehe Kapitel REINIGUNG UND PFLEGE.
www.aeg.com • Achten Sie darauf, dass am Installationsort des Geräts eine gute Luftzirkulation herrscht. 10.2 Einstellen des Restfeuchtegrads der Wäsche Ändern des werkseitig eingestellten Restfeuchtegrads: 1. Schalten Sie das Gerät ein. 2. Warten Sie etwa 8 Sekunden. 3. Wählen Sie eines der verfügbaren Programme. 4. Halten Sie gleichzeitig die Tasten Reverse Plus und Knitterschutz gedrückt. Die Kontrolllampen über den Tasten leuchten. 5.
DEUTSCH 17 ein. 3. Reinigen Sie beide Teile des Siebs mit der feuchten Hand. 11.2 Leeren des Wasserbehälters Der Kondensatbehälter muss nach jedem Trockengang entleert werden. Wenn der Kondensatbehälter voll ist, bricht das Programm automatisch ab. Die Kontrolllampe Behälter leuchtet auf, Sie müssen den Wasserbehälter entleeren. Entleeren des Wasserbehälters: 4. Bei Bedarf können Sie auch die Bürste und warmes Leitungswasser und/oder einen Staubsauger zum Reinigen des Siebs verwenden.
www.aeg.com 3. Schieben Sie die Kunststoffverbindung ein und setzen Sie den Behälter ein. 4. Drücken Sie die Taste Start/Pause, um das Programm fortzusetzen. 11.3 Reinigen des Wärmetauschers Wenn die Anzeige Kondensator blinkt, müssen der Wärmetauscher und sein Fach überprüft werden. Sind sie verschmutzt, reinigen Sie beide. 4. Klappen Sie die Wärmetauscherabdeckung nach unten. So führen Sie die Prüfung durch: 1. Öffnen Sie die Tür. Ziehen Sie das Sieb heraus. 2.
DEUTSCH 19 ACHTUNG! Verwenden Sie keine Scheuermittel oder Metallschwämmchen zum Reinigen der Trommel. 11.5 Bedienfeld und Gehäuse reinigen Verwenden Sie einen handelsüblichen neutralen Reiniger zur Reinigung des Bedienfelds und Gehäuses. 6. Schließen Sie die Wärmetauscherabdeckung. 7. Verriegeln Sie die Abdeckung, bis sie einrastet. 8. Setzen Sie das Sieb wieder ein. Verwenden Sie zur Reinigung ein feuchtes Tuch. Trocknen Sie die gereinigten Flächen mit einem weichen Tuch.
www.aeg.com Problem Nicht zufriedenstellendes Trockenergebnis. Mögliche Ursache Abhilfe Es wurde ein falsches Programm eingestellt. Wählen Sie ein geeignetes Pro- Der Filter ist verstopft. Reinigen Sie den Filter. 2) Die Trocken Plus-Option war auf Ändern Sie die Trocken Plus-Op- minimal eingestellt. 3) tion auf mittel oder maximal. 3) Das Gerät ist zu stark beladen. Beachten Sie die maximale Füllmenge. Das Lüftungsgitter ist verstopft.
DEUTSCH Problem Der Trockengang ist zu lang.5) Mögliche Ursache 21 Abhilfe Der Filter ist verstopft. Reinigen Sie den Filter. Das Gerät ist zu stark beladen. Beachten Sie die maximale Füllmenge. Die Wäsche wurde nicht genug geschleudert. Schleudern Sie die Wäsche richtig. Die Raumtemperatur ist zu hoch, es handelt sich nicht um eine Gerätestörung. Falls möglich, senken Sie die Raumtemperatur.
www.aeg.com Die Schutzverkleidung gewährleistet einen Schutz gegen das Eindringen von festen Fremdkörpern und Spritzwasser (Feuchtigkeit), außer an den Stellen, an denen das Niederspannungsgerät keinen Schutz gegen Feuchtigkeit besitzt. IPX4 1) Gemäß EN 61121; bei einer Beladung von 7 kg Baumwolle und einer Drehzahl von 1000 U/min.
DEUTSCH Geräte mit diesem Symbol nicht mit dem Hausmüll. Bringen Sie das Gerät zu Ihrer örtlichen Sammelstelle oder wenden Sie sich an Ihr Gemeindeamt.
136931790-A-242014 www.aeg.