Operation Manual

Selecting the programme

Use the programme selector to set the pro-

gramme you require. The estimated time to end

of the programme appears in the LCD in h:mm

format (hours:minutes).

During the cycle time elapses by steps of one mi-

nute; less than 1 hour the leading zeros are not

shown (ex. “59”, “5”, “0”).

DRYNESS

Increases the dryness of the dried laundry adequately to the selected level: , ,

. This option helps to achieve satisfying result of drying.

SPIN SPEED

Shorten the drying cycle adequately to the spin speed the laundry was spun previously in

the washing machine. The higher spin speed was, the shorter drying cycle length. Availa-

ble spin speed values (rpm): from

up to (with 200 rpm steps)

This option allows to save time and energy.

BUZZER

Audible confirmation of:

– cycle end

– anti-crease phase start and end

– cycle interruption

–error

When active the symbol

is on.

LONG ANTI-CREASE

Prolongs standard anti-crease phase at the end of the drying cycle to 90 min. When ac-

tive the symbol

is on. This option helps to keep laundry free from creases. Laundry can

be removed at any time during the anti-crease phase.

TIME

Operates only with TIME PROGRAMME . Allows to set individual time of drying from min-

imum 10 min. to maximum of 3 hours (in 10 min. steps).

1. Turn the programme knob to the TIME PROGRAMME .

2. Press the TIME button repeatedly until the desired programme duration is shown in

the display, e.g.

for a programme of 1 hour and 20 minutes.

Daily use