User Manual

9.4 Change the language after
the first activation
1. Touch button Spin and button
Stains/Prewash at the same time for
some seconds.
2. When the display shows the
language set, turn the programme
knob to set the new language.
3. Touch Start/Pause button to confirm
the selection.
10. DAILY USE - WASHING ONLY
10.1 Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.2 Activating the appliance
and setting a programme
1. Press button On/Off to activate the
appliance.
2. Turn the programme knob to the
required programme.
The programme indicator comes on.
The indicator of Start/Pause button
flashes with red colour.
The display shows the default
temperature and spin and, if the door is
already open, the maximum load
allowed for the set programme (this
information disappears when you close
the door).
3. If necessary, touch Temp.°C button
and Spin button to change the water
temperature and the spin speed.
4. If necessary, touch the other buttons
to add some options or to set a
delayed start.
The display shows the symbol of the set
option and the digit shows the delayed
time.
10.3 Loading the laundry
1. Open the appliance door
2. Put the laundry in the drum, one item
at a time.
3. Shake the items before you put them
in the appliance.
Make sure not to put too much laundry
in the drum.
4. Close the door.
CAUTION!
Make sure that no laundry stays between
the seal and the door. There is a risk of
water leakage or damage to the laundry.
10.4 Filling the detergent and
additives
www.aeg.com20