User Manual

15.8 Cleaning the inlet hose filter and the valve filter

It could be necessary to clean the filters when:

• The appliance does not fill with water.

• The appliance fills with the water for a long time.

• The indicator of button Start/Pause flashes and the display shows the related alarm.

Refer to 'Troubleshooting'.

To clean the water inlet filters:

• Close the water tap.

• Remove the water inlet hose from the

water tap.

• Clean the filter in the inlet hose with a stiff

brush.

• Remove the inlet hose behind the

appliance.

• Clean the filter in the valve with a stiff

brush or a towel.

45°

20°

• Install again the inlet hose. Make sure that

the couplings are tight to prevent

leakages.

• Open the water tap.