User manual

2. Select 1 of the available programs.
3. Touch and hold down the Dryness
Level and Refresh buttons at the
same time.
One of the symbols appears on the
display:
- Maximum dryness
- Extra dryness
- Standard dryness
4. Touch the Start/Pause button
repeatedly until you reach the
desired dryness level.
Dryness lev-
el
Display symbol
Maximum
dryness
Extra dry-
ness
Standard
dryness
5. To memorise the setting touch and
hold down the Dryness Level and
Refresh buttons at the same time for
approximately 2 seconds.
9.3 Deactivating the tank
indicator
The water container indicator is activated
by default. It illuminates at the end of the
drying cycle or during the cycle if the
water reservoir is full. If the draining kit is
installed the water container is drained
automatically and the indicator can be
deactivated.
To deactivate the indicator:
1. Turn the appliance on.
2. Select 1 of the available programs.
3. Touch and hold down Refresh and
Time Drying buttons at the same
time.
One of 2 configurations is possible:
•
the Tank indicator: is on if the
symbol appears - the
water container indicator is
permanently activated
•
the Tank indicator: is off if the
symbol appears - the
water container indicator is
permanently deactivated
10. CARE AND CLEANING
10.1 Cleaning the filter
At the end of each cycle the Filter
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
1. Open the door. Pull the filter up.
2. Push the hook to open the filter.
3. Use a moist hand to clean both parts
of the filter.
ENGLISH 15