User manual

To activate the programme push the
button as on the illustration. The LED
above the button illuminates in red col-
our.
CHANGE A PROGRAMME
To change a programme, push the
On/Off button to deactivate appliance.
Push the
On/Off to activate the ap-
pliance and then set the programme
again.
AT THE END OF PROGRAMME
When the drying cycle is completed,
the
symbol flashes on the display. If
the Buzzer (Zoemer) function is on, an
acoustic signal sounds intermittently for
one minute.
To remove the laundry:
1. Push the Auto/Off button for 2 sec-
onds to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
After each drying cycle:
• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)
48